Connecting Analyzer To A Computer; Selecting Display Language; Updating Analyzer; Led - Stihl ADG 2 Gebrauchsanleitung

English
5.2

Connecting Analyzer to a Computer

The analyzer can be used together with STIHL diagnostics
software. The analyzer must be connected to a computer for
this purpose.
► Install STIHL diagnostics software on the computer.
► Connect the analyzer to a wall outlet, @ 5.1.
► Connect USB cable to the analyzer.
► Connect USB cable to the computer.
The computer recognizes the analyzer.
► Select STIHL ADG 2 in the diagnostics software and
follow the instructions.
5.3

Selecting Display Language

The display language on a factory-new analyzer is English.
The required display language can be selected with the aid
of the STIHL diagnostics software.
► Connect the analyzer to a wall outlet, @ 5.1.
► Connect the analyzer to a computer, @ 5.2.
► At top left on the main screen of the STIHL diagnostics
software: select "Firmware", "ADG 2" and "Update".
► Select country code of the required display language.
The analyzer's firmware and display language are
updated automatically.
This update can take up to 20 minutes.
The selected display language is available on the analyzer
after successful completion of the update.
5.4

Updating Analyzer

The analyzer must be updated for new STIHL or VIKING
products and new diagnostic functions. The analyzer can be
updated with the aid of the STIHL diagnostics software.
► Connect the analyzer to a wall outlet, @ 5.1.
► Connect the analyzer to a computer, @ 5.2.
► Connect the computer to the Internet.
► Select STIHL ADG 2 in the STIHL diagnostics software
and click on "Check for updates".
The analyzer is updated automatically.
16
The analyzer cannot be updated automatically if it is not
connected to a computer or the computer is not connected
to the Internet.
► Contact your sales company or importer.

6 LED

6.1

LED on Analyzer

The LED indicates the operating status of the analyzer:
– It can glow green, yellow or red.
– It can flash green, yellow or red.
If the LED glows green, the product function being tested is
OK.
If the LED glows yellow, the product function being tested is
OK. A temporary malfunction is stored in the analyzer's error
memory.
If the LED glows red, the product function being tested is
faulty. A malfunction code is displayed.
If the LED flashes yellow, the user must take action on the
product.
If the LED flashes red, it may mean:
– A safety notice is shown on the display.
– The analyzer must be updated, @ 5.4.
– The analyzer is faulty.

7 Diagnosis

7.1

Testing Cordless Product with the Analyzer

► Connect the analyzer to a wall outlet, @ 5.1.
► If the analyzer is used together with STIHL diagnostics
software: Connect the analyzer to a computer, @ 5.4.
► Insert the STIHL AP or STIHL AK battery in the analyzer.
6 LED
0458-757-9921-B