Diagnostic Software; Installing Diagnostic Software - Stihl MDG 1 Gebrauchsanleitung

English
Reduce the risk of electric shock:
Always connect the power tool to a
–
properly installed wall outlet.
Insulation of connectors must be in
–
good condition.
After completing test with
the analyzer, disconnect
the power supply unit.
Store the analyzer and power supply
unit out of the reach of children.
16

Diagnostic software

STIHL diagnostic software may be used
only in conjunction with STIHL
analyzers.
System Requirements
STIHL diagnostic software may only be
installed on a computer that meets the
system requirements. Administrator
rights are required for installation under
® ®
Microsoft Windows – contact the
system administrator if necessary.
Operating System
®
Microsoft Windows Vista
–
® ®
Microsoft Windows 7
–
® ®
Microsoft Windows 8
–
® ®
Microsoft Windows 8.1
–
® ®
Microsoft Windows 10
–
Software Requirements
®
Microsoft .NET 4.6 or higher
–
® ®
Adobe Acrobat Reader 9 or
–
higher
Hardware Requirements
CPU 2 GHz
–
2 GB free memory
–
A minimum of 250 MB hard disk
–
space
Resolution – SVGA monitor
–
(minimum resolution 1280 x 1024)
USB interface 2.0 or higher
–
Installing Diagnostic
Software
Administrator rights are required –
contact administrator if necessary.
User has administrator rights
Download STIHL Diagnostic
N
Software from
www.service.stihl.com.
User: SDS
password: STIHL
Start installation with double click on
N
"SDSSetup.exe".
Follow installation instructions in
N
STIHL Diagnostics Software.
®
User does not have administrator rights
Download STIHL Diagnostic
N
Software from
www.service.stihl.com.
User: SDS
password: STIHL
Click on "SDSSetup.exe" with right
N
mouse button and select "Run as
Administrator".
MDG 1