Grundfos MAGNA1 Handbuch Seite 21

Type Key:
DN32-120 F (N), DN40-80 to 180 F (N), DN50-(X)XX F (N),
DN65-(X)XX F (N), DN80-(X)XX F (N), DN100-(X)XX F (N) and DNXX-(X)XX D (F) (N).
– Machinery Directive (2006/42/EC)
Standard used: EN 809:1998 + A1:2009.
– Radio Equipment Directive (2014/53/EU)
Standards used: EN 60335-1:2012/AC:2014 + A11:2014, EN 60335-2-51:2003 + A1:2008 +
A2:2012, EN 62233:2008.
EN 55014-1:2006 + A1:2009 + A2:2011, EN 55014-1:2017, EN 61000-6-2:2005, EN 61000-3-
2:2014, EN 61000-3-3:2013, ETSI EN 301 489-1 V2.2.0, ETSI EN 301 489-17 V3.2.0.
ETSI EN 300 328 V2.1.1
– Ecodesign Directive (2009/125/EC)
Circulators:
Commission Regulation (EC) No: 641/2009 and Commission Regulation (EU) 622/2012.
Applies only to circulators marked with the energy efficiency index EEI. See the pump nameplate.
Standards used: EN 16297-1:2012, EN 16297-2:2012.
Applies from July 22, 2019
– RoHS Directives (2011/65/EU and 2015/863/EU).
Standards used: EN50581:2012.
Type Key:
DN25-(X)XX (N), DN32-40 to 100 F (N), DN32-120 (N), DN40-40 to 60 F (N).
– Machinery Directive (2006/42/EC)
Standard used: EN 809:1998 + A1:2009.
– Low Voltage Directive (2014/35/EU).
Standards used: EN 60335-1:2012/AC:2014 + A11:2014, EN 60335-2-51:2003 + A1:2008 +
A2:2012, EN 62233:2008.
– EMC Directive (2014/30/EU).
Standards used: EN 55014-1:2006 + A1:2009 + A2:2011, EN 55014-1:2017, EN 61000-6-2:2005,
EN 61000-3-3:2013, EN61000-3-2:2014
– Ecodesign Directive (2009/125/EC).
Circulators:
Commission Regulation (EC) No: 641/2009 and Commission Regulation (EU) 622/2012.
Applies only to circulators marked with the energy efficiency index EEI. See the pump nameplate.
Standards used: EN 16297-1:2012, EN 16297-2:2012.
Applies from July 22, 2019
– RoHS Directives (2011/65/EU and 2015/863/EU).
Standards used: EN50581:2012.
This EU declaration of conformity is only valid when published as part of Grundfos service kit instruc-
tion (publication number 99363375) or the Grundfos Safety instructions and other important
information (publication number 99210935).
Bjerringbro, 10th July 2018
Manufacturer, Person authorised to compile technical file and empowered
Andreas Back-Pedersen
Senior Manager
Grundfos Holding A/S
Poul Due Jensens Vej 7
8850 Bjerringbro, Denmark
to sign the EC/EU declaration of conformity.
21