Customer Service - Siemens KG..F Serie Gebrauchsanleitung

Fault
The temperature
in the cool fresh"
compartment is
too cold or too
warm.

Customer service

Please check your telephone book or the
customer service list for your nearest
customer service facility. When
contacting customer service, please
ALWAYS quote the product number
(E number) and production number
(FD number) of your appliance.
Possible cause
The fixed setting has been set too
high or too low (e.g. if there is frost
in the cool fresh" compartment).
Remedial action
The temperature in the cool fresh
compartment can be changed to be
2 steps warmer and/or colder. The
displayed numbers Fig. 2/8 refer to
steps and not to °C. Step 5 corresponds
to a temperature of almost 0 °C
Step 3 - coldest setting
Step 8 - warmest setting
Press button Fig. 2/6 for 3 seconds
until a beeping signal sounds,
the display 8 flickers.
Change the setting with button 7.
After one minute, the set temperature
is stored.
These numbers can be found on the
rating plate. Fig. z
To prevent unnecessary call outs, please
assist customer service by quoting the
product and production numbers. This
will save you additional costs.
en
35