Cleaning The Appliance; Cleaning The Cool Fresh Space - Siemens KG..F Serie Gebrauchsanleitung

Cleaning the appliance

1. Attention: Pull out the mains plug
or switch off the fuse!
2. Wipe the door seal with clear water only
and then wipe dry thoroughly.
3. Clean the appliance with lukewarm
water and a little washing up liquid.
Water for rinsing sold not reach the
lighting. Fig. t/A and B.
4. After cleaning: reconnect and switch
on the appliance.
Warning:
Do not use abrasive or acidic cleaning
agents and solvents.
Regularly clean the condensation channel
and drainage hole, Fig. r so that the
condensation can flow out. Clean the
condensation channel with cotton buds,
etc.
The rinsing water must not run through
the drain hole into the evaporation pan.
After cleaning the appliance, re insert
the stopper into the drainage hole for
functional reasons.
Never clean the shelves or containers
in the dishwasher. The parts may warp!
Cleaning the cool fresh
space
Removing the drawers
Pull out the drawers all the way, lift up and
remove Fig. w.
When inserting the drawers, place them
on the telescopic rails and slide in
(drawers lock onto the telescopic rails).
Removing the humidity filter
The humidity filter Fig. 1/15 above the
humidity drawer can also be removed. To
do this, first remove the humidity drawer.
Then, lift humidity filter and pull out.
Lift filter cover Fig. e, remove filter, clean
in luke warm water, allow to dry and
reassemble.
General information for
looking after the surfaces
Clean surfaces with luke warm water
and a little washing up liquid.
After cleaning, rub thoroughly dry.
en
31