Pump Shutdown - Agilent Technologies Turbo-V 1000HT Bedienungshandbuch

17 Technical Information
Use
With normal LOW SPEED operation, the pump will run at about 2/3
of its nominal speed and achieves a base pressure somewhat higher
than the standard specifications. If the gas load becomes higher, the
controller output frequency and voltage decrease automatically, and
the Turbo-V pump is slowed down in proportion to the gas load until
it reaches 4 KRPM.
If the LOW SPEED mode is selected after normal operating condition
is reached, the display shows:
A
while approaching the low speed value.
When the low speed mode is deselected, the pump accelerates to its
rotational speed. During the acceleration, the display shows:
N

Pump Shutdown

Press the front panel STOP push-button or remove the remote signal;
the power from the turbopump will be removed and the pump will
begin to slow down.
300/310
P P R O A
X X
O R M A
X X
Turbo-V 1000HT Controller User Manual / 87-900-894-01
C H I N
K R P
L O P
K R P
G L
M
E R A T
M
S
L S
I O N
(G)