Agilent Technologies Turbo-V 1000HT Bedienungshandbuch Seite 260

17 Technical Information
Optional Serial Port
BYTES
20
21
22
*The values for current and voltage are given as numbers, scaled
from 0 to 255, where 0 corresponds to 0 V and 255 to the full scale
voltage (100 V) or current (10 A).
When the Request is "G", the Answer will contain a string of 12
characters with the following parameters:
Tab. 7
BYTES
1
2-3
4
5-8
9
10
11
12
When the configuration parameters have to be changed, send a
Request string with "H" characters of the following type:
The CRC is calculated on the string consisting of H + DATA.
260/310
MEANING
R1 Status
R2 Status
CRC
MEANING
Speed adjust value (in KRPM)
Pump cycles number (integer coded in 2 bytes)
Speed threshold
Run up time in seconds
(long coded in 4 bytes)
Deat time
(0 = NO 1 = YES)
Soft Start mode
(0 = NO 1=YES)
Water cooling
(0 = NO 1=YES)
CRC
"H" + .... DATA .... + CRC
Turbo-V 1000HT Controller User Manual / 87-900-894-01 (G)