Maintenance; Every Day; Every Week; Every Month - struers LaboForce-3 Gebrauchsanweisung

Every Day

Every Week

Cleaning a Drip Lubricator
Cleaning a LaboDoser Dosing
Unit

Every Month

LaboForce-3
Instruction Manual

3. Maintenance

Clean the specimen holder plate with a damp cloth.
Clean LaboForce-3 with a damp cloth.
 Remove the drip lubricator from LaboForce-3
 Hold the lubricant bottle firmly and remove the top lid.
 Pour out the lubricant, and fill the bottle with a mild soap
solution.
 Open the valve to also clean the tube.
 Exchange the soap water with water and repeat the above.
 Empty the lubricator.
 Put the lubricator back on LaboForce-3 and tighten the finger
screw.
 Refill with lubricant and mount the top lid.
Follow the Instructions for Use that are supplied with the Dosing
Unit.
The necessary friction on the springs for the sample load is
generated by friction pins located behind the indicators in the
spring housing. The pins need to be adjusted with an Allen-key
from time to time to ensure a constant force level.
11