Changing Radio Modes; Configuring The Product; Menu Options Via Menu / Info Button - Silvercrest SDRF 10 A1 Bedienungs- Und Sicherheitshinweise

After being switched on, the product will automatically start play-
ing the last DAB+ station selected.
Note: You can manually scan for DAB+ stations at any time or
start an automatic station scan as described in chapter "DAB+
station scan".

Changing radio modes

You can switch between DAB+ and FM mode.
With the product in DAB+ mode, press the Mode button
switch to FM mode. The colour LCD
Press the Mode button
colour LCD
Note: After being switched on, the product is automatically in the
last radio mode used and start playing the last station selected.

Configuring the product

You can customise the product to your preferences. The various menu
options can be found under system settings.
Note: The system systems can be changed in both DAB+ as well as
FM mode.
Note: If no entry is made or button pressed, the product automatically
returns to playback mode after approx. 30 seconds. Any settings which
were not saved by pressing the Select button

Menu options via Menu / Info button

You can use the Menu / Info button
settings.
Press and hold the Menu / Info button
Use the Next button
options.
Confirm each entry by pressing the Select button
again to return to DAB+ mode. The
18
now shows "Digital Radio".
1
and the Prev button
15
will now show "FM".
1
will be lost.
16
to configure various basic product
10
to open the menu options.
10
11
to
18
10
from the menu
.
16
GB/MT 61