lamber DSP26-add Installation Bedienung Seite 20

ENGLISH
First Section - FOR THE USER
WORKING AND USE
The machine protection degree is IP21, therefore it should not be washed with direct high pressure jet water;
The objects to be washed should be correctly arranged for a good washing-up result;
We suggest to descale dishes, from time to time, in order to remove calcareous and/or starchy sediments by soaking it
in suitable solutions suggested by your cleansing agent supplier.
If you need to buy new dishes remember the following: Dishes and cups: preference must be given to china or non-
porous pottery articles, with smooth surface. Glasses: choose a glass suitable to be washed in dish-washing machines.
Surfaces must be smooth and bottoms the least concave possible.
OPERATION BEFORE WORKING
B
EFORE STARTING THE WORKING OPERATION BE SURE
:
THAT
- the cock is open;
- the filters and the overflow are in
their housings;
- the wash arm and the rinse arm are
pivot;
- brightener and washing powder dispenser
containers are loaded.
- Make sure the front door is closed (as regards DSP5
model, make sure the hood is completely down).
- Be sure that the outer general feeding switch is off.
CAUTION: Observe the safety notes and
dosage data for the use of chemicals. During
the use of the chemical substance wear
protective clothing, gloves and protective
glasses. Do not
products.
T :
HEN PROCEED
1
-
Turn the machine on by using the wall switch
and push the switch "A" on the control panel (DIS.1).
The green lamp "G" lights up and the machine loads
automatically (with closed Door) (The lamp "F" is
flashing quickly).
Once the loading has been completed, the green lamp
"F" is flashing slowly : it indicates that the machine is
ready to start the washing cycle.
option
free to
mix different cleaning
Please pay attention to the opening and
closing of the door of the Dish/Glass-washers.
Do not use the machine if you are wearing
clothes/items that could get entangles in the
dishwasher parts. As they can limit personnel's
regular moving ability!
2
-
If you put it in by hand, pour the detergent onto
the pump suction filter in the tank
(ask the detergent supplier for measuring!).
If the machine is provided with automatic devices for
measuring the additional liquid detergent, check that
there is product in the containers
3
-
Put the dishes into the baskets after having
carefully removed any solid and fat waste. Leave cutlery
to soak previously and dishes too, if necessary, in case
they are going to be washed long after having been
used. Do not overload baskets, dishes do not have to
be placed one on another, water must be able to cover
any side of the dishes.
In order to place dishes properly, see the special
paragraph.
WASHING
4
-
Put the basket into the machine.
Close the door and push the button "B".
(NB: as regards DSP5 model, the cycle starts when the
hood is closed).
The lamp "F" stays ON without blinking and it indicates
that the cycle has begun.
20
.