Herunterladen Inhalt Inhalt Diese Seite drucken
lamber 045F-ek Bedienungsanleitung
Vorschau ausblenden Andere Handbücher für 045F-ek:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

DICHIARAZIONE DI CONFORMITA' - DECLARATION OF CONFORMITY
DECLARATION DE CONFORMITE' - KONFORMITÄTS ERKLÄRUNG
Noi - The following - Nous soussignés - Die Unterzeichnete Fa:
LAMBER snc di Affaba F. e C. – Via Italia 6 – 26855 Lodi Vecchio (LO) ITALY
Dichiariamo sotto la nostra responsabilità che - Declare under our responsibility that:
Attestons sous notre responsabilité que - Erklärt auf eigene Verantwortung dass:
Apparecchio – Apparatus - Appareil - Apparat:
- LAVASTOVIGLIE - DISHWASHING MACHINE - LAVE-VAISSELLE - GESCHIRRSPÜLMASCHINE
Marca - Trademark - Marque - Marke: LAMBER
Fabbricante - Manufacturer - Fabricant - Fabrikant: LAMBER
Tipo/Modello - Type / Model – Type / Modéle – Typ / Modell:
al quale questa dichiarazione si riferisce è conforme alle seguenti norme:
for which this declaration refers to the conformity of the following standards:
auquel se réfère cette déclaration, est conforme aux normes suivantes:
auf welche sich diese Erklärung bezieht, folgendem Standard entsprechen:
Sicurezza degli apparecchi elettrici d'uso domestico e similare - Norme generali EN 60335-1(2012)
Safety of household and electrical appliances - General requirements EN 60335-1(2012)
Sicurezza degli apparecchi elettrici d'uso domestico e similare - Norme particolari per lavastoviglie per uso collettivo EN 60335-2-58
(2005) + A1 (2008) + A11 (2010).
Safety of household and electrical appliances - Part 2^ Particular requirements for commercial electric dishwashing machines EN
60335-2-58 (2005) + A1 (2008) + A11 (2010).
Apparecchi elettrici per uso domestico e similare – Campi elettromagnetici – Metodi di misurazione dei campi elettromagnetici di
elettrodomestici e apparecchi simili per quanto riguarda l'esposizione umana. EN 62233 (2008)
Household and similar electrical appliances – Electromagnetic fields – Measurement methods for electromagnetic fields of
household appliances and similar apparatus with regard to human exposure EN 62233 (2008)
Limiti e metodi di misura delle caratteristiche di radiodisturbo degli apparecchi elettrodomestici, e similari a motore o termici, degli
utensili e degli apparecchi elettrici similari. EN 55014–1 (2006) + A1 (2009) + A2 (2011)
Limits and methods of measurement of radio disturbance characteristics of electrical motor-operated and thermal appliances for
households and similar purposes, electric tools and similar electric apparatus - EN 55014-1 (2006) + A1 (2009) + A2 (2011)
Limiti per le emissioni di corrente armonica (apparecchiature con corrente di ingresso  16 A per fase) - EN 61000-3-2 (2014) + o
>16A e  75A EN 61000-3-12 (2011)
Limits for harmonic current emissions (equipment input current
61000-3-12 (2011)
Limitazione delle fluttuazioni di tensione e dei flicker in sistemi di alimentazione in bassa tensione per apparecchiature con corrente
nominale  16 A. EN 61000-3-3 (2013) o >16A e  75A EN 61000-3-11 (2000)
Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current
(2013) o >16A e  75A EN 61000-3-11 (2000)
Requisiti di immunità per apparecchi elettrodomestici, utensili e degli apparecchi elettrici similari EN 55014-2 (1997)+ A1 (2001) +
A2 (2008)
Immunity requirements for household appliances, tools and similar apparatus. Product family standard EN 55014-2 (1997) + A1
(2001) + A2 (2008)
Sicurezza del macchinario, Concetti fondamentali, principi generali di progettazione - Terminologia di base, metodologia – EN ISO
12100 (2010).
Safety of machinery Basic concepts, general principles for design - Basic terminology, methodology – EN ISO 12100 (2010).
in base a quanto previsto dalle Direttive - selon ce qui est prévu par les Directives:
on the basis of what is foreseen by the Directives - aufgrund der vorgesehenen Richtilinien:
Decliniamo ogni responsabilità per sinistri a persone o a cose derivanti da manomissioni da parte di terzi o da carenze di manutenzione o riparazione.
Nous déclinons toute responsabilité pour sinistres à personnes ou à objets qui derivent de l'intervention de la part de tiers non specialistes ou de carences de manutention ou
reparation.
We decline any responsability for injuries or damage derived from machine misuse, abuse by others or improper machine maintenance or repairs.
Wir Iehnen jegliche Verantwortung für Schäden an Personen oder Dingen ab, die auf fehlerhaftes Eingreifen Dritter oder auf mängelhafte Wartung oder Reparation
zurückzuführen.
li 2016
(data/date/Datum)
responsabile costituzione fascicolo tecnico/technical file case manager : Ing Roberto Affaba
045F-ek / 045F-ek-add
2004/108/EC and 2006/42/EC.
il socio amministratore/The administrator
indirizzo/address : via italia 6 – 26855 – Lodi Vecchio (LO) Italy
16 A per phase) - EN 61000-3-2 (2014) or >16A and
matr................
75A EN
16 A. EN 61000-3-3

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für lamber 045F-ek

  • Seite 1 Noi - The following - Nous soussignés - Die Unterzeichnete Fa: LAMBER snc di Affaba F. e C. – Via Italia 6 – 26855 Lodi Vecchio (LO) ITALY Dichiariamo sotto la nostra responsabilità che - Declare under our responsibility that: Attestons sous notre responsabilité...
  • Seite 2 L’apparecchio non è destinato a essere usato da persone (bambini compresi) le cui capacità fisiche, sensoriali o mentali siano ridotte, oppure con mancanza di esperienza o di conoscenza, a meno che esse abbiano potuto beneficiare, attraverso l’intermediazione di una persona responsabile della loro sicurezza, di una sorveglianza o di istruzioni riguardanti l’uso dell’apparecchio.
  • Seite 3 The directive mentioned above, to which make reference for further details, provides for punitive actions in case of illegal disposal of such waste. Lamber guarantees a percentage of recovery at least of 90% in medium weight for each equipment. The 80% - always as regards the medium weight- of recovered material is recycled or reused.
  • Seite 4 INDICE ITALIANO Note generali pag 05 Introduzione e norme di sicurezza pag. 06 Fate conoscenza con l’apparecchio pag. 10 Parte prima - NORME PER L'UTILIZZATORE pag. 11 Pannello Comandi pag. 12 Funzionamento ed uso, detersivi, manutenzione, inconvenienti possibili pag. 13 Parte seconda - NORME PER L'INSTALLATORE pag.
  • Seite 5: Remarques Generales

    NOTE GENERALI ITALIANO Vi ringraziamo per la scelta da Voi fatta nell'acquisto della Vostra LAVASTOVIGLIE. Il perfetto funzionamento della macchina e risultati di lavaggio ottimali sotto il profilo igienico sanitario potranno essere garantiti solo se tutte le avvertenze del presente Manuale verranno rispettate. Ci auguriamo che le informazioni contenute nel presente manuale Vi siano di aiuto.
  • Seite 6 INTRODUZIONE ITALIANO E NORME DI SICUREZZA La macchina è una lavastoviglie a caricamento frontale di tipo industriale. Rumorosità della macchina, misurata a 1m di distanza ed a 1,6m di altezza, inferiore a 60dB(A). (Norme EN ISO 4871 ed EN ISO 11204) OSSERVAZIONI PRELIMINARI Leggere attentamente le avvertenze contenute nel presente libretto di istruzioni, in quanto forniscono importanti indicazioni riguardanti la sicurezza d'installazione, d'uso e di manutenzione:...
  • Seite 7 INTRODUCTION FRANÇAIS ET NORMES DE SECURITE' L’appareille est une lave-vaisselle industrielle à ouverture frontale. Bruit de la machine, inférieur à 60dB(A) - (Normes EN ISO 4871 et EN ISO 11204). REMARQUES PRELIMINAIRES Lisez attentivement les notices contenues dans ce mode d'emploi, car elles fournissent d'importantes indications concernant la sécurité...
  • Seite 8 INTRODUCTION ENGLISH AND SAFETY NORMS INTRODUCTION The machine is an industrial dish-washing machine . Noise level of the machine, less than 60 dB(A), (Norms EN ISO 4871 and EN ISO 11204). PRELIMINARY OBSERVATION Carefully read the instructions reported in the present user manual, as it gives important indications about safety of installation, operation and maintenance: carefully keep the present manual for further consultations;...
  • Seite 9: Einführung

    EINFÜHRUNG DEUTSCH UND SICHEREITSNORMEN EINFÜHRUNG Die maschine ist ein industrieller Frontlade-Geschirrspüler . Die Geräuschentwicklung der Maschine ist bei einem Abstand von 1 m und einer Höhe von 1,6 im gemessen worden und liegt unter 60 dB(A) - (Norms EN ISO 4871 and EN ISO 11204). VORANMERKUNGEN Lesen Sie bitte aufmerksam die in vorliegendem Gebrauchshandbuch enthaltenen Anmerkungen, die Ihnen wichtige Hinweise zur Installationssicherheit, Bedienung und Wartung geben:...
  • Seite 10 Faites connaissance avec l'appareil Learn to use the appliance Wollen Sie den Apparat kennenlernen 045F-ek Lavaggi o superi o re rot a nte in acci a i o inox Lavage supéri e ur rotati f en acier i n oxydable...
  • Seite 11: Instructions Pour L'utilisateur

    NORME PER L'UTENTE INSTRUCTIONS POUR L'UTILISATEUR INSTRUCTIONS FOR THE USER BEDIENUNGSANLEITUNG...
  • Seite 12: Kontrollpanel

    PANNELLO COMANDI EMPLOI CONTROLES CONTROL PANEL KONTROLL PANEL Interruttore generale Interrupteur général Main switch Hauptschalter Pulsante selezione tempo lavaggio Bouton sélecteur temps de lavage Wash time selection pushbutton Programmwahlschalter Pulsante ciclo Bouton cycle Cycle pushbutton Programmdrucktaste Lampada ciclo Lampe indicatrice de cycle Cycle lamp Programmkontrollampe Lampada temperatura...
  • Seite 13: Funzionamento Ed Uso

    ITALIANO Parte prima - NORME PER L'UTILIZZATORE FUNZIONAMENTO ED USO La macchina lavastoviglie assicura una produzione oraria di 30-20-15 cestelli. Il grado di protezione della macchina è IP21 e quindi non deve essere lavata con getti di acqua diretti ad alta pressione. La disposizione corretta degli oggetti da lavare è...
  • Seite 14 Le lampade ciclo lampeggiano fino al completamento In funzione della durezza dell’acqua è tuttavia possibile delle fasi di lavaggio .Alla fine del ciclo le lampade modificare la programmazione della Rigenerazione. Si smettono di lampeggiare. veda la tabella relativa nella sezione dedicata all’installatore.
  • Seite 15: Manutenzione Giornaliera

    MANUTENZIONE GIORNALIERA PULIZIA MANUTENZIONE PREVENTIVA Spegnere Macchina premendo l'interruttore "A" e scaricare l'acqua della IMPORTANTE: Prima eseguire Vasca togliendo il Troppopieno; qualsiasi operazione di manutenzione, pulizia o (si veda anche il paragrafo specifico a riparazione disinserire l'apparecchiatura dalla pagina precedente) rete di alimentazione mediante l'interruttore a muro;...
  • Seite 16 DETERSIVI e BRILLANTANTE Attenzione. Durante l’uso di sostanze chimiche è consigliabile indossare abbigliamento appropriato, come guanti e occhiali protettivi. La scelta del detersivo appropriato è una condizione indispensabile per ottenere ottimali risultati di lavaggio sotto il profilo igienico. E' quindi importante tenere in considerazione alcuni fattori. Innanzi tutto è...
  • Seite 17 INCONVENIENTI - POSSIBILI CAUSE - RIMEDI ANOMALIA POSSIBILE CAUSA RIMEDIO accende Interruttore a muro disinserito Inserire l'interruttore a muro macchina Spina alimentazione Inserire la spina di alimentazione inserita La macchina non carica Rubinetto dell'acqua chiuso; Aprire il rubinetto acqua Il troppopieno non è nella sua Riporre il troppopieno nella sua sede sede Il tubo di carico è...
  • Seite 18 DISINCROSTAZIONE In presenza di acque dure si formano all'interno della macchina e talvolta anche sulle stoviglie, depositi calcarei che per ragioni igieniche e di funzionamento devono essere rimossi con un'operazione di Disincrostazione. Le procedure operative e la frequenza di questo intervento vengono consigliate dal fornitore del Detersivo il quale dispone di opportuni prodotti, generalmente a base di acido Fosforico.
  • Seite 19: Avant Le Lavage

    FRANÇAIS Première partie - INSTRUCTIONS POUR L'UTILISATEUR FONCTIONNEMENT ET EMPLOI L'appareil Lave-vaisselle assure une production horaire de 30-20-15 casiers. L'indice de protection de la machine est IP21. Elle ne doit pas être lavée au jet d'eau directe et à haute pression. La disposition correcte de la vaisselle est condition essentielle pour obtenir les meilleures résultats de lavage.
  • Seite 20 Les lampes de contrôle clignotent jusqu’à la fin du En fonction de la dureté de l’eau, il est toutefois lavage. A la fin du lavage les lampes ferment de possible de modifier la programmation de l’opération clignoter. de Régénération. Voir le tableau correspondant dans la section dédiée à...
  • Seite 21: Entretien Journalier

    ENTRETIEN JOURNALIER NETTOYAGE ENTRETIEN PREVENTIFS Mettre hors tension l'interrupteur mural et la machine en poussant IMPORTANT: Avant d'effectuer toute l'interrupteur "A" et faire écouler l'eau opération de nettoyage et d'entretien, débrancher de la cuve en enlevant le trop-plein; l'appareil du réseau électrique; Suivez les instructions sur l’entretien de ce Faites attention au mouvement de guide;...
  • Seite 22 DETERGENT et PRODUIT DE RINCAGE Attention. Lors de l’utilisation de produits chimiques est conseillé de porter des vêtements appropriés, tells que des gants et des lunettes de protection. Le choix d'un détersif approprié est une condition indispensable pour obtenir des résultats optimaux de lavage sous le profil hygiénique.
  • Seite 23 INCONVENIENTS POSSIBLES - CAUSES - REMEDES PROBLEMES CAUSES REMEDES Interrupteur général débranché; Insérer l'interrupteur La machine ne démarre Fiche d’alimentation pas insérée Insérer la fiche d’alimentation La machine ne charge Robinet à l'eau fermé; Ouvrir le Robinet pas l'eau Le Trop-plein n'est pas à sa Remettre Trop-plein dans...
  • Seite 24 DESINCRUSTATION A cause des eaux dures, il se forment à l'intérieur de la cuve, parfois aussi sur la vaisselle, des dépôts calcaires qui, pour des raisons d'hygiène et de fonctionnement, doivent être enlevés par désincrustation. Le procès et la fréquence de cette intervention sont conseillés par le fournisseur du détersif qui dispose de produits appropriés en général à...
  • Seite 25 ENGLISH First Section - FOR THE USER WORKING AND USE The dishwashing machine can wash up to 30-20-15 baskets per hour. The machine protection degree is IP21, therefore it should not be washed with direct high-pressure jet water. The objects to be washed should be correctly arranged for a good washing-up result. We suggest rescaling dishes, from time to time, in order to remove calcareous and/or starchy sediments by soaking it in suitable solutions suggested by your cleansing agent supplier.
  • Seite 26 washing cycle you chosed will be extended up to REGENERATING having reached the exact temperature (thermocontrol). (for machines with Water softener) G – Extracting the basket inclines and shakes it If the glass-washer is equipped with a Water softener carefully. So the rest of the water drops will be the regeneration of resins is automatic according to eliminated.
  • Seite 27: Daily Maintenance

    DAILY MAINTENANCE CLEANING PREVENTIVE MAINTENANCE Disconnect the machine by wall switch and with pushbutton "A"; PRECAUTION CLEANING Lift the overflow pipe and let the water INSTRUCTIONS drain out of the tank; IMPORTANT : Before carrying out the cleaning maintenance operations, Please pay attention to the opening and disconnect the equipment from the mains closing of the door of the Dish/Glass-washers.
  • Seite 28 DETERGENT and RINSE-AID Attention. During the use of chemicals is advisable to wear appropriate clothing, such as gloves and protectives glasses. The choice of a suitable cleansing agent is an essential condition if you want to obtain extremely good washing results as regards hygienic results. It’s therefore important to consider some factors.
  • Seite 29 PROBLEMS - CAUSES - SOLUTIONS PROBLEMS CAUSES SOLUTIONS The machine doesn't catch Main switch is switched off; Turn ON the main switch; Power plug is not inserted Insert the power plug The water doesn't go in Water cock closed; Open water cock; The Overflow is not in place;...
  • Seite 30 DESCALING When hard water is used you can find inside the machine and also on dishes calcareous sediments which must be removed both for hygienic and operating reasons by a descaling operation. Operating process and frequency of this intervention are suggested by your cleansing agent supplier who has suitable products, generally containing phosphoric acid.
  • Seite 31: Teil 1 - Für Den Benutzer

    DEUTSCH Teil 1 - FÜR DEN BENUTZER ARBEITSWEISE UND ANWENDUNG Die Geschirrspülmaschine erlaubt eine Reinigung von 30-20-15 Körbe pro Stunde. Keine alten oder rissigen Geschirrteile verwenden, hier besteht die Gefahr von Bakterienbildung. Bei kalkartiger Ablagerung sollte man von Zeit zu Zeit die Geschirrteile in einer Lösung, die vom Lieferant empfohlen wird, entkalken. Bei Anschaffung neuer Geschirrteile ist das Folgende zu beachten: Porzellan oder nicht poröse Keramikteller, Tassen mit glatter Oberfläche bevorzugen.
  • Seite 32: Optimale Ergebnisse

    Automatisch, nach den eingebenen Parameter die von Das Aufleuchten der Lame „D“ zeigt die erreichte Wassertemperatur von (85°°90°C) an. Fabrikant Eingestellt wurden. Der Spülvorgang beginnt erst beim Erreichen der N.B. jede Sekunden richtigen Wassertemperatur. Dauer Tankfüllungsdauer hält die Maschine Waschvorganges wird deshalb solange verlängert bis für etwa Minuten...
  • Seite 33: Reinigung Und Wartung

    REINIGUNG RECHZEITIGE TÄGLICHE REINIGUNG WARTUNG GESCHIRRSPÜLMASCHINE INNEREN WICHTIG: Bevor jegliche Wartungsarbeit, Reinigung oder Reparatur Die Maschine mit dem Hauptschalter "A" vornimmt, muss man die Maschine von der abschalten und das Tankwasser durch Elektroleitung mit dem Hauptschalter trennen. Entfernung Überlaufrohres ablassen (siehe entsprechendes Kapitel) Die Hinweise in diesem Leitfaden zur Wartung beachten;...
  • Seite 34: Spülmittel Und Klarspüler

    SPÜLMITTEL und KLARSPÜLER Achtung. Während des Gebrauchs von chemischen Substanzen wird der empfohlen entsprechende Kleidung zu tragen, wie Handschuhe oder Schutzbrille. Die richtige Wahl des Reinigungsmittels ist Voraussetzung, um optimale hygienische Ergebnisse zu erreichen. Weiter ist es notwendig weitere Faktoren in Betracht zu ziehen. Es ist auf alle Fälle notwendig nicht schaumbildende Produkte stark alkalisch und Chloraktiv speziell für Industriegeschirrspülmaschinen zu benutzen, die von bekannten Firmen hergestellt werden.
  • Seite 35 STÖRUNGEN - MÖGLICHE URSACHEN - LÖSUNGEN STÖRUNGEN MÖGLICHE URSACHEN LÖSUNGEN Der Schalter an der Mauer ist nicht Diesen einschalten Die Maschine schaltet eingeschaltet sich nicht an Der Netzstecker ist nicht reingesteckt Diesen reinstecken Der Wasserhahn ist zu; Wasserhahn öffnen Die Maschine nimmt kein Wasser auf Überlaufrohr nicht...
  • Seite 36: Nützliche Ratschläge Zur Wartung Von Inoxstahl

    ENTFERNUNG VON VERKRUSTUNGEN Bei hartem Wasser können sich im Inneren der Maschine und auch manchmal auf dem Geschirr Kalkablagerungen bilden, die aus hygienischen Gründen mit einer Verkrustungsentfernung weggenommen werden müssen. Die Durchführung und die Frequenz dieser Arbeit werden vom Geschirrspüllieferanten vorgeschlagen, der entsprechende Produkte zur Verfügung hat, die meistens auf einer Phosphorsäurebasis liegen.
  • Seite 37: Instructions Pour L'installateur

    NORME PER L’INSTALLATORE Le istruzioni che seguono sono rivolte a personale qualificato, il solo autorizzato ad attuare le verifiche e le eventuali riparazioni. La Ditta declina ogni responsabilità nel caso di interventi effettuati da personale non qualificato e/o utilizzo di ricambi non originali. INSTRUCTIONS POUR L'INSTALLATEUR Les instructions suivantes sont adressées à...
  • Seite 38 INSTALLATION SCHEMA ALLACCIAMENTI INSTALLATIONSBLATT INSTALLATION 045F-ek Altezza massima per scarico a muro - Hauteur maximale pour vidange à mur Maximum height for drain to wall - Maximale Bodenhöhe für Wandwasserablauf Elettrovalvola carico - Electrovanne chargement 3/4" G Water inlet - Wasseranschluß...
  • Seite 39: Collegamento Elettrico

    ITALIANO Parte seconda - NORME PER L'INSTALLATORE Posizionare la macchina in prossimità degli attacchi. In fase di installazione, effettuare un buon livellamento della macchina al fine di consentire un corretto funzionamento della stessa. La Ditta declina ogni responsabilità per gli eventuali danni derivanti dalla mancata osservanza delle norme sotto citate.
  • Seite 40: Alimentazione Idrica

    E' consigliabile utilizzare solo Addolcitori a ALIMENTAZIONE IDRICA "Scambio Ionico" o ad "Osmosi Inversa". I procedimenti basati su campi magnetici o Rispettare rigorosamente Normative radiazioni elettromagnetiche sono del tutto Nazionali e Regionali esistenti in materia. inutili per l'uso specifico in Lavastoviglie. L'impianto idrico deve avere le seguenti CONDOTTO: Provvedere a portare in caratteristiche:...
  • Seite 41 PROGRAMMAZIONE SETTAGGIO RIGENERAZIONE (cod. 0300834) 1- A macchina spenta controllare la posizione dei dip-switch sulla scheda elettronica e memorizzarla; 045F-ek-add 1 2 3 4 2- Impostare poi il dip-switch secondo la tabella seguente in funzione del numero di cicli di lavaggio che si vogliono impostare per avviare la segnalazione dell’operazione di rigenerazione;...
  • Seite 42 Disabilitazione-abilitazione SOFT-START (0300834) Per default la macchina è dotata di partenza ciclo con sistema SOFT-START a partenza progressiva della pompa di lavaggio. E’ possibile disabilitare tale funzione seguendo le istruzioni di seguito riportate. 1 - Dare tensione tramite l'interruttore a muro e Chiudere l'interruttore "A"(premere) posto sul pannello comandi.
  • Seite 43 - Si consiglia di procedere in ogni caso una volta al mese al lavaggio dei tubi di dosaggio e del dosatore con acqua. Se non si rispetta questa indicazione, la garanzia decade e Lamber declina ogni responsabilità sul prodotto. E’ possibile pulire da soli i tubi di dosaggio e il dosatore con dell’acqua.
  • Seite 44 PRIMA INSTALLAZIONE ! Per MACCHINE CON ADDOLCITORE INCORPORATO (serie ADD) (OPTIONAL) In fase di prima installazione riempire d’acqua il contenitore “A” in figura 1, prima di inserire sale specifico pastiglioni seguendo le istruzioni seguenti: -1 – Svitare il coperchio del contenitore sale alloggiato all’interno della lavastoviglie.
  • Seite 45: Branchement Electrique

    FRANÇAIS Deuxième partie - INSTRUCTIONS POUR L'INSTALLATEUR Positionner la machine près des attaches. Pendant l'installation, effectuer la mise à niveau de la machine et contrôler à l'aide d'un niveau que la machine soit parfaitement en équilibre. La Maison décline toute responsabilité pour les éventuels dommages dérivants du manque d'observation des normes citées.
  • Seite 46: Branchement Hydraulique

    désincrustation augmenter BRANCHEMENT HYDRAULIQUE concentration de détersif. Il est conseillé d'utiliser seulement des Respecter rigoureusement normes adoucisseurs à "échange ionique" à Nationales et Régionales concernantes la "Osmose inverse": les procédés basés aux matière. champs électriques radiations électromagnétiques sont tout à fait inutiles L'installation doit avoir les caractéristiques pour l'usage en lave-vaisselle.
  • Seite 47 1 - Avec la machine arrêtée, contrôler la position des dip-switch sur la fiche électronique et la mémoriser; 045F-ek-add 1 2 3 4 2 - Régler ensuite le dip-switch selon le tableau suivant en fonction du numéro des cycles de lavage désirés pour entamer la signalation de l’opération de régénération;...
  • Seite 48 Désactivation-activation du SOFT START (démarrage progressif) (0300834) La machine est équipée d’usine du démarrage cycle avec système SOFT START à démarrage progressif de la pompe de lavage. Il est possible de désactiver cette fonction en procédant selon les instructions suivantes. 1.
  • Seite 49 Les conditions de garantie ne s’appliquent pas en cas de non respect des instructions telles que décrites ci-dessus. Lamber décline toute responsabilité sur le produit dans le cas où vous ne vous conformeriez pas à celles-ci.
  • Seite 50 Première installation Machines avec adoucisseur automatique incorporé (série “add”) OPTION Lors d’une première installation, remplir d’eau le bac à sel “A” (voir la figure 1) ,avant de mettre le sel en pastilles spécifique en respectant les instructions suivantes : -1 – Dèvisser le bouchon du bac à...
  • Seite 51: Electrical Connection

    ENGLISH Second Section - FOR THE INSTALLER During installation carry out a good machine levelling, which is a prerequisite for a correct operation thereof. The Manufacturer cannot assume any responsability for any damage to persons or property deriving from the non-observance of the above specified norms. For a correct installation see the drawing on page 38.
  • Seite 52: Water Connections

    WATER CONNECTIONS WORKS TEMPERATURES Carefully comply with any national or Water temperature 55°÷60°C regional regulations in force. Rinse temperature 80°÷85°C Water installation must have the following characteristics: n.b.: To help correct working thermocontrol system, do NOT adjust the thermostat during the washing cycle. Temperature: 55°C DO NOT TAMPER WITH THE Dynamic Pressure :...
  • Seite 53: Press The Start Button

    1 - With the machine stopped, check the position of the dip-switches on the electronic board and memorise it; 045F-ek-add 1 2 3 4 2 - Then set the dip-switch in accordance with the following table, according to the number of washing cycles you wish to set to start the regeneration operation signaling;...
  • Seite 54 How to disable-enable the SOFT-START (0300834) By default the machine is provided with SOFT START system with gradual start of the wash pump. It’s possible to disable this function by following the instructions below. 1. Turn on the machine by wall switch and press switch ‘A’ that you can find on the control panel. At this moment the thermometers’...
  • Seite 55 - You are recommended to proceed with the cleaning of the dosage hoses and the detergent pump with water once a month. Failure to comply with these guidelines will render this guarantee invalid. Lamber disclaims any liability for consequential damage on the product.
  • Seite 56: First Installation

    FIRST INSTALLATION ! Machines with incorporated and automatic water-softener (series “add”). OPTION In case of first installation, fill with water the salt jar “A” (picture 1) , before putting the specific salt tablets in it, according to the following instructions : -1 –...
  • Seite 57: Teil 2 - Für Den Installateur

    DEUTSCH Teil 2 - FÜR DEN INSTALLATEUR Die Maschine in der Nähe der Anschlüsse aufstellen. Während der Installation die Maschine gut ausrichten, um die gute Funktion der Maschine zu gewährleisten. Unsere Firma ist von jeglicher Verantwortung für eventuelle Schäden befreit, die auf Nichtbeachtung nachstehend aufgeführter Normen zurückzuführen sind.
  • Seite 58: Wasserversorgung

    WASSERVERSORGUNG ARBEITSTEMPERATUREN Wassertemperatur 55°÷60°C Hier müssen die jeweiligen Vorschriften der nationalen und regionalen Länder beachtet Spültemperatur 80°÷85°C werden. n.b.: Für eine richtige Arbeitsweise des Temperatur 55°C Thermocontrols, den Thermostat während des Wenn Maschine Betriebs Hauptwasch Zyklus NICHT Kaltwasser angeschlossen wird, verlängert regulieren! sich der Spülvorgang.
  • Seite 59: Zyklus Regenerierung Programmierung

    1 - Wenn die Maschine ausgeschaltet ist, Kontrollieren Sie die position der dip-switch in Elektronische Tafeln und speichern Sie die . 045F-ek-add 1 2 3 4 2 - Programmieren Sie den dip-swicht nach folgende Tafeln angaben und nach Waschungzyklus Anzahl die Sie Programmieren möchten damit das Signal des Aufbereitung bearbeitung starten kann.
  • Seite 60: Soft-Start Aktivieren-Inaktivieren

    SOFT-START aktivieren-inaktivieren (0300834) Standardmäßig Geschirrspülmaschine Programmstart durch SOFT-START-System (Progressivstart der Waschpumpe) ausgestattet. Um die Soft-Start zu inaktivieren, folgen Sie die folgenden Anweisungen. 1. Stromzufuhr durch Einschalten des Wandschalters einleiten und Hauptschalter “A“ der Schalttafel drücken. Jetzt erleuchten die Thermometerdisplays, läuft das Wasser ein und wird der Tank gefüllt. Wenn der Tank gefüllt ist, erleuchtet die Programmkontrolllampe.
  • Seite 61: Austausch Dosierwaschschlauches

    - Es wird jedoch in jedem Fall angeraten einmal im Monat die Dosierungsschläuche und das Dosiergerät selbst mit Wasser zu säubern. Wenn man diese Hinweise nicht beachten sollte, verfällt die Garantie und di Fa. Lamber übernimmt keine Produkthaftung. Es ist auch möglich alleine die Dosierungsschläuche und das Dosiergerät mit Wasser zu reinigen.
  • Seite 62 ERSTEN AUFSTELLUNG ! Maschinen mit eingebauten automatischen Wasserentkalker (Serie “add”). OPTION ! In der ersten Installationsphase den Behälter „A“, wie in Figur 1 mit Wasser füllen; bevor man das spezielle Salz in Tablettenform einführt, folgende Hinweise befolgen: -1 – Den Schraubverschluss des Salzbehälters aufschrauben, der sich im Inneren der Spülmaschine befindet.
  • Seite 63: Schema Branchements Anschlußschema

    SCHEMA BRANCHEMENTS SCHEMA COLLEGAMENTI CONNECTIONS SCHEME ANSCHLUßSCHEMA Resistenza BOILER - Résistance SURCHAUFFEUR BOILER Elements - BOILERHEIZUNG Marrone - Marron Braun - Braun Nero - Noir Black - Schwarz Ponticelli - Ponts Staples - Brücke Resistenza VASCA - Résistance CUV E T ANK Elements - T ANKHEIZUNG Marrone - Marron Brown - Braun...
  • Seite 64 SCHEMA REGOLAZIONI - SCHEMA REGULATION REGULATION SCHEME - EICHUNG Entrata additivo per risciacquo Entrée du produit de rinçage Rinse aid inlet Nachspülmitteldosiergerät T ermostati Lavaggio e Risciacquo Thermostat Lavage et rinçage W ash and rinse thermostat T ankthermostat und Boilerthermostat Dosatore risciacquo Doseur de proudit pour rinçage Rinse-aid dispenser...
  • Seite 65 SCHEMA ELECTRIQUE SCHEMA ELETTRICO SCHALTSCHEMA WIRING DIAGRAM 230 V 50Hz Fa11 Fa12 Fa14 Fa19 Fa21 Fa7-8 Fa10 P.S. Interruttore generale Interrupteu r gén éral Main switch Hauptschalter Finecorsa Microinterrupteur Limit switch Endschalter Resistenza boiler Résistan ce Surch auffeur Boiler elemen ts Boilerheizun g Resistenza vasca Résistan ce Cuve...
  • Seite 66: Scheda Elettronica

    SCHEDA ELETTRONICA FICHE ELECTRONIQUE P .C.BOARD ELEKTRONISCHE STEURUNG filo/fil/wire/draht ITA SCARICO VIDANGE DRAIN PUMP ABLAUFPUMPE ETV DEVIATRICE ELECTROVANNE DETOURNANTE SWITCHING VALVE VENTILABLENKUNG VENTIL RIGENERA REGENERATION REGENERATIN ENTKALKUNG POMPA LAVAGGIO POMPE LAVAGE WASHING PUMP WASCHPUMPE RISCIACQUO RINÇAGE RINSING SPÜLUNG FA7-8 FASE PHASE' PHASE PHASE...
  • Seite 67 COMPOSANTS COMPONENTI KOMPONENTEN COMPONENTS SCHEDA ELETTRONICA FICHE ELECTRONIQUE P.C.BOARD ELECTRONISCHE STEURUNG CASSETTA QUADRO COMANDO - CONTROL BOARD - BOITE DE CONTROLE - SCHALTT AFEL T ASTIERA A MEMBRANA - P ANNEAU A TOUCHES SENSITIVES SOFT TOUCH CONTROL P ANEL - MEMBRAN-TAST A TUR BASAMENTO - SOCLE - BASE - UNTERBAU Cnp-s400ek...

Diese Anleitung auch für:

045f-ek-add

Inhaltsverzeichnis