Agilent Technologies TPS-compact X3580-64000 Bedienungshandbuch Seite 247

Power supply cord: The correct cable for electrical wiring is a three
wires (Ph+N+Earth) cable. The wire section has to be at least 0.75
mm
Assure a free space all around the system at minimum of 20cm to allow proper
CAUTION!
air circulation.
FLANGE
ISO 63
ISO 100 K
ISO 160 K
The turbopump with ConFlat inlet flange must be fixed to the
vacuum chamber by means of the appropriate Agilent hardware. See
the appendix "Technical Information" for a detailed description.
The TPS-compact cannot be fixed by means of its base.
NOTE
For installation of optional accessories, see "Technical Information".
TPS-compact User Manual / 87-901-010-01 (H)
2
(AWG18).
FIXING DEVICE
M10 clamps
M10 clamps
M10 clamps
Instructions for Use
Installation
N. FIXING TORQUE
4 22 Nm
4 22 Nm
4 22 Nm
16
247/314