Introduction; Intended Use; Parts Description; Technical Specifications - Parkside PISG 120 A1 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

INVERTER WELDER
PISG 120 A1
z Introduction
Congratulations! You have
chosen a high-quality unit
from our company. Familiar-
ise yourself with the product before using it
for the first time. In addition, please carefully
refer to the instructions for use and the safety
instructions below. Initial operation of this
tool must be performed by trained person-
nel.
KEEP OUT OF THE REACH OF
CHILDREN!
z Intended use
This welding tool is suitable for welding
metals such as carbon steel, alloy steel, other
stainless steels, copper, aluminium, titanium,
etc. The product has a control lamp, a ther-
mal protection indicator, and a cooling fan.
It further has a strap to safely lift and move
the product. Improper product handling
can be dangerous to persons, animals and
objects. Only use the product as described
and for its indicated purpose. Keep these
instructions in a safe place. When passing
this product on to others, please also include
all the documents. Any use other than the in-
tended is prohibited and potentially danger-
ous. Damages resulting from non compliance
or misuse are not covered by the warranty
and are not included in the manufacturer's
liability.
Note: Classification per EMV standard:
Class A per IEC 60974-10
Warning: Equipment categorised Class A
are intended for industrial use. When used
in other areas, electromagnetic tolerance
may not be warranted or failures may occur.
z Parts Description
Carrying strap
1
Overheating control lamp
2
Control knob
3
Earth terminal
4
Electrode holder
5
Combination wire brush with chipping
6
hammer
Welding shield
7
Grip
8
ON / OFF switch
9
Mains lead
10
Protection glass
11
z Technical specifications
Mains connection:
Max. welding current
and the respective
conventional load voltage:
Rated value of the
Mains voltage:
Highest rated value
of the mains current:
Maximum effective
input current:
Rated value of the
no-load voltage:
Protection class:
Weight:
Duty cycle X:
Falling characteristic
z Scope of delivery
1 Inverter welder
1 Welding shield
2 Welding cables
1 Combination wire brush with chipping
hammer
1 Carrying strap
5 Welding electrodes (2 x 1.6 mm;
2 x 2.0 mm; 1 x 2.5 mm)
1 Instructions for use

Introduction

230 V~ 50 Hz
10 A/20,4 V -
120 A/24,8 V
U : 230 V
1
I : 25,2 A
1max
I : 13,8 A
1eff
U : 70 V
0
IP21S
3,2 kg
30 %
GB 7