Component Video - Clatronic dvd 754 Bedienungsanleitung

Fig. 2/14
Fig. 2/11
Fig. 2/13
Fig. 2/12
05-DVD 754 - GB 45
SCART
SCART is used to transmit both Video and Audio data.
1. Plug the SCART jack fi rmly into the socket on the back of the player.
2. Plug the SCART jack into the corresponding socket on your playback
device.

Component Video

Connection using a Component Video cable ensures a very high replay quality.
Component Video transmits only Video signals.
1. Plug each of the three jacks into the corresponding sockets on the DVD-
Player.
2. Plug the jacks into the corresponding socket on your playback device.
Select „Video Output" from the menu „Video Setup Page". Here you
can change the settings „Off", „YUV", „P-YUV", „P-RGB" and „RGB" on
the playback device that you have connected. Please see the operating
instructions of the connected device for the correct setting.
S-Video
Connection using a S-Video cable ensures a very high replay quality.
Component Video transmits only Video signals.
1. Plug the S-Video jack into the socket on the back of the player.
2. Plug the S-Video jack into the corresponding socket on your playback
device.
Composite-Video
Composite-Video is used to transmit both Video data.
1. Plug the Composite-Video jack into the socket on the back of the player.
2. Plug the Composite-Video jack into the corresponding socket on your
playback device.
Starting up Themen
45
22.01.2007, 9:04:30 Uhr