Switching On The Player; About The Dvd-Player - Clatronic dvd 754 Bedienungsanleitung

Fig. 2/10

Switching on the player

Fig. 1/1
05-DVD 754 - GB 47
Digital
Connect the Coaxial cable for transmission of digital Audio signals to your
playback device or your amplifi er.
1. Plug the Audio jack into the socket on the back of the player.
2. Plug the Audio jack into the corresponding socket on your playback device
or your amplifi er.
Turn on the main switch of the DVD player by pressing the „ " on/off switch on
the front of the machine.

About the DVD-Player

With this DVD-Player you can play a vast variety of DVD-formats
➯ Page 38, „Technical data".
However, you must be aware that in many cases DVDs are encrypted with
a so-called "Regional Code". This specifi es for which region in the world the
DVD is intended. As an example, the DVDs marked with regional code "1" are
intended for the USA and Canada. DVDs with regional code "2" are for use in
Europe.
NOTE:
With your DVD-Player you can only play DVDs with regional code "2". There
are both lots of burning and compressing methods as well as high quality
differences in (burned) CDs/DVDs. Moreover, the music industry has not yet
agreed on a fi xed standard for copy protection. This may, in very isolated
cases, result in problems when relaying CDs, DVDs and MP3 CDs. This is
no malfunction of the player.
Furthermore, there may be isolated problems when playing CDs or DVDs
which were created on a PC (e.g. holiday photographs). In case of problems
check the settings of the DVD writing program on your computer. You should in
particular make sure that the DVD has been fi nalized. For further information
on this matter please refer to the operating manual of your recorder.
Input Not Possible
If a function or input selected by you is not possible, the adjacent symbol is
shown on the screen.
About the DVD-Player Themen
47
22.01.2007, 9:04:33 Uhr