Automatic Defrost - Blaupunkt Arrifana 12 Bedienungsanleitung

A12C
CHANGING THE UNIT °C / °F
The temperature in the segment display (29) can be indicated in °C or °F.
Please proceed as follows to change the temperature unit:
1. Simultaneously press the UP (19) and DOWN (23) buttons. Alternatively you can press the
°C / °F button (34) on the remote control. The displayed temperature is converted to the
other unit.
SWING FUNCTION
The Swing function can be activated via the remote control or directly at the device. Using the
Swing function, you can adjust the position of the deflector or activate continuous movement
of deflector.
1. Simultaneously press the Timer (17) and Fan (18) buttons or press the Swing button (35)
on the remote control. The deflector moves up and down continuously.
2. Press the Timer (17) and Fan (18) buttons simultaneously once again or press the Swing
button (35) on the remote control to stop the deflector in a certain position or to switch
the Swing function off.

AUTOMATIC DEFROST

At low ambient temperatures, ice may form at the evaporator. The device will then carry out
an automatic defrost. The automatic defrost indication E4 appears on the segment display
(29) and disappears again, when automatic defrosting is finished. The compressor switches off
and the fan keeps running until defrosting is completed. The duration of the defrost process
can vary. Do not switch off the device during automatic defrost. Do not remove the mains
plug from the mains socket.
www.blaupunkt.com
20