Frost Protection Function; Automatic Defrosting; Installation And Adjustment; Install The Heat Pipe Assembly (As Shown In Fig.1) - Blaupunkt Moby Blue S 0709E Bedienungsanleitung

MBS0709E, MBS12E
NOTE:
• The appliance can only be operated with 2.4 GHz routers. 5 GHz routers are not supported.
• The appliance is equipped with only one network connection. It cannot be turned off.
IV Protection function

3.1 Frost Protection Function:

In cooling mode, if the temperature of the exhaust pipe is too low, the machine will
automatically enter protection status; if the temperature of the exhaust pipe rises
to a certain temperature, it can automatically revert to normal operation.
3.2 Overflow Protection Function:
When water in the water pan exceeds the warning level, the machine will auto-
matically sound an alarm, and the "FULL" indicator light will flash. At this point, you
need to move the drainage pipe connecting the machine or the water outlet to
sewer or other drainage area to empty the water (details see Drainage Instructions
at the end of this chapter). After the water is emptied, the machine will automati-
cally return to the original state.

3.3 Automatic Defrosting :

The machine has automatic defrosting function.Defrosting can be achieved
through four - way valve reversing. (only for heating model)
3.4 Protection Function of the Compressor
To increase the service life of the compressor, it has a 3-minute delay booting pro-
tection function after the compressor is turned off.
V Installation and adjustment
1. Installation:
Warning: before using the mobile air condi-
tioning, keep it upright for at least two hours.
The air conditioning can be easily moved in
the room. In the moving process, ensure that
the air conditioning is in the upright position
and the air conditioning should be placed on
a flat surface. Do not install and use the air
conditioning in the bathroom or other humid
environments.
1.1 Install the heat pipe assembly
(as shown in Fig.1)
www.blaupunkt.com
Figure 1
13