Operation - Safescan 2200 serie Handbuch

6. [ADD] button. Press to activate the ADD function. Press and hold for 3 seconds to set the IR detection
sensitivity level.
7. [UV] button. Press to (in)activate UV (ultra violet) counterfeit detection. Press and hold for 3 seconds to
set the UV detection sensitivity level.
Product specific items
2210
8. [CLEAR] button. Press to clear count results & Batch settings.
2250
2. [START] button. Press to clear previous counting result.
9. [MG] button. Press to (in)activate MG (magnetic features) counterfeit detection. Press and hold for 3
seconds to set the MG detection sensitivity level.
1.3 LCD screen

2.0 OPERATION

Connect the power cord (enclosed) with the machine, then connect the power cable to a power socket and switch
On the machine.
When powered On, the machine will start making a self-test to check if all functions are working well. During this
self-test the machine will beep and the LCD screens are displaying the model number. After 3 seconds the screens
will display '0'. The machine is now ready for usage.
Note: The default settings of the machines are:
2210
Add & Batch function: Off, UV detection: On, Counting mode: automatic
2250
Add & Batch function: Off, UV + MG detection: On, Counting mode: automatic
If the machine found a problem during the self-test, an error code will be shown on the main LCD screen. Please refer
to chapter 7.2 for troubleshooting and solve the problem.
10. UV detection indication
11. MG detection indication (for 2250)
12. ADD (cumulative counting) indication
13. Batch counting indication
14. Batch count number
15. Previous count number (Check)
16. Current counting results (Count)