First Operation - Safescan 2850 Schnellinstallationsanleitung

English

First operation

Sort Auto Add
2. Prevent unnecessary counting errors. Set the banknote hopper guide so that the sides of the banknotes are
enclosed and therefore the banknotes are centered. Organise your banknotes in a neat stack, make sure the back of
the stack is aligned straight and the notes are centered.
3. When the banknotes are placed on the hopper the machine will automatically start counting. Press [AUTO] on the
screen to switch Off this function.
4. When the device detects a suspect banknote during counting,
it will stop, sound an alarm and display an error message. The
last counted banknote in the stacker is the suspect not
Remove this note and press [Start/OK] to continue counting.
More info, articles, tutorials and videos at: support.safescan.com
6
1. The device starts by default with the following settings:
A. Detection type: UV|MG
B. Counting mode: Sort
pcs
0 C. Auto start: ON
D. Add mode is Off
E. Counting speed:1200
1200 UV|MG
Suspected note