Counterfeit Detection - Safescan 2200 serie Handbuch

4.2 BATCH-function
With the Batch-function you can pre-set the machine to count the exact quantity of notes that you require.
Press [BAT] to pre-set the batch number (100, 50, 20, 10 sheets). The batch indicator will light up, indicating the
batch-function is active.
Press the [+] or [-] button to modify the batch number with 1 sheet. Hold the [+] or [-] button to modify the batch
number per 5 sheets.
After you have finished the pre-setting procedure, put the banknotes into the hopper. The unit will count the
banknotes until it reaches the quantity you have pre-set.
If the last stack of banknotes contains less sheets than the pre-set batch number, the [COUNT] screen will flash
continuously when the machine has finished counting.
Note: after power off, the machine will start up with the Batch-function: Off
4.3 Using the Add- & Batch-function together
It is possible to count banknotes with both Add- & Batch-functions active. To use these functions together, activate
the Add-function by pressing the [ADD] button and then pre-set the desired batch quantity.
During the counting process, the [COUNT] screen will show the total counted quantity. Every time the pre-set batch
quantity is reached, the machine will stop counting. After removing the banknotes from the stacker, the machine will
continue the counting.
The [COUNT] screen will flash continuously if the end result of the count is not a multiplied number of the pre-set
batch quantity. When new banknotes are added to the hopper, the machine will continue counting to reach the pre-
set batch quantity.
4.4 Sort count function
The 2200 series banknote counters are equipped with a size detection function. This function can help to prevent
wrong counting results in case of one or more different banknotes which were mixed in the sorted banknotes by
mistake. The machine will alarm if a banknote with a different size than the first counted banknote is detected.
Following the alarm, on the [CHECK] screen "E4" will be blinking. The machine will automatically stop counting. The
banknote of the different denomination will be the last counted banknote in the stacker.

5.0 COUNTERFEIT DETECTION

5.1 Detection methods
E1. UV detection
If the machine detects a banknote with suspected UV properties, an alarm will sound and the [CHECK] screen
will blink 'E1'+'UV'. Counterfeit notes reflect UV light, making the surface of the note shine very bright. Genuine
banknotes absorb ultraviolet light.
E2. MG detection (only available for 2250 model)
If the machine detects a banknote with suspected MG properties, an alarm will sound and the [CHECK] screen will
blink 'E2'+'MG'. Most genuine banknotes are printed using magnetic ink. If the machine detects a note without
magnetic ink, it will consider it as counterfeit.