Safescan 2200 serie Handbuch Seite 5

ENGLISH | DEUTSCH | ČESKY | MAGYAR | БЪЛГАРСКИ | POLSKI | SLOVENČINA
3.0 COUNTING
3.1 Counting modes
This machine has two counting modes: automatic and manual.
3.1.1 Automatic (default)
Press and hold the [START] button until [COUNT] screen displays "YES", indicating that the machine is now in
automatic counting mode. Press [START] again to confirm the selection.
Directly after placing banknotes on the hopper the machine will start counting automatically.
3.1.2 Manual
Press and hold the [START] button until the [COUNT] screen displays "NO", indicating that the machine is now in
manual counting mode. Press [START] again to confirm the selection.
When in manual mode, the machine will start counting after pressing the [START] button.
Note: next time you power on the machine, it will be set in the counting mode you have last chosen.
3.2 Correct method for inserting a stack of banknotes
Place a stack of banknotes in the center of the hopper and start counting. Place the banknotes between the
banknote guides as shown in (Image 1) below. Then, swiftly, push the banknotes backward on the hopper plate
(Image 2).
Image 1
Image 2
3.3 Counting results
The [COUNT] screen will display the number of banknotes counted. When your first count is completed, remove the
counted notes from the stacker and begin a second count. The quantity of notes already counted, will shift from the
[COUNT] screen to the [CHECK] screen and the [COUNT] screen will now display the quantity of the second count.
This enables the user to check whether the machine is counting accurately.
4.0 ADD AND BATCH FUNCTIONS
4.1 ADD-function
The Add-function is for adding counting results. Using the Add-function, you can add new counting results to
previously made counting results. This function is useful if you need to count more banknotes then the capacity of
the hopper allows. The counting results will be displayed on the main digital screen.
If you press the [ADD] button once, the machine 'beeps' and the Add-indicator will light up, indicating the adding
function is activated. Press [ADD] again to switch Off the Add-function. The Add-indicator will switch Off.
Note: after power off, the machine will start up with the Add-function: Off