Tubs Filled From Overflow; Draining The Tub - Jacuzzi Designer Collection Serie Bedienung Und Wartung

The jet can be set to three different shapes by turning the
outermost part of the showerhead dial (2).
NB: The diverter valve will click when the mixer is closed and
1
7
automatically return to the "tub filling" position.
i
I (
8) To remove the showerhead from its support, press the
ring downwards (1) and turn it by approximately 45° (2).
For this purpose, reposition the showerhead, press the ring and
turn it by approximately 45°, until it snaps upwards (closing of
1
2
45 °
8
the seal on the flexible hose).

TUBS FILLED FROM OVERFLOW

i
I (
9)The tub can be filled from the drain pipe through the
overflow.
I Lift the mixer lever (A) to start filling from the overflow.
I Operate the diverter valve (B) to stop filling the tub and start
2
A
9
using the showerhead.

DRAINING THE TUB

i
I (
10) Turn either the knob on the taps (A-A1) or of the knob
on the drain pipe (C) to open or close the drainage column plug.
NOTE
I
The plumbing circuit of the tub (totally sealed) is drained rather
slowly through the valves built into the suction nozzle and the
hydromassage nozzles.
C
10
24
B
A1
5
2
A