Filling The Tub; Tubs With Single-Control Mixer And Showerhead - Jacuzzi Designer Collection Serie Bedienung Und Wartung

3
1
45°
2
3

FILLING THE TUB

i
I
( 2) Before filling the tub, make sure that the lever present
on the back of the spout is positioned downwards.
I
Then operate the knobs checking the temperature of the
water.
NOTES
I
It is advisable to fill the tub with pre-mixed water (i.e. not the hot
water first and then the cold water) at a maximum temperature of
60° to prevent damaging the pipes and to reduce the formation of
lime scale.
4
i
I
When in the tub, the water level should completely cover
( 4)
the highest nozzles.
TUBS WITH SINGLE-CONTROL MIXER TAP
AND EXTRACTABLE SHOWERHEAD
i
I
( 5) Various Jacuzzi® whirlpool tub models fit a single-
control mixer tap provided with automatic button diverter valve
(1) and showerhead (2) with flexible hose concealed under the
tub.
1
I
To fill the tub, lift the lever of the single-control mixer tap (3);
turn the mixer lever to adjust the required temperature.
i
I (
6) The tub spout is arranged again on the tub rim but
separately from the taps. The spout is provided with an exclusive
water sheet jet.
i
I (
7) For using the showerhead, proceed as above and press
the automatic diverter valve button (1): the water sheet will be
interrupted and water will start flowing from the showerhead..
23
2
3
5
6