Kärcher HDS 6/10 C Originalbetriebsanleitung Seite 14

Please read and comply with these origi-
nal instructions prior to the initial opera-
tion of your appliance and store them for
later use or subsequent owners.
– Before first start-up it is definitely necessary to read
the operating instructions and safety indications Nr.
5.951-949.0!
– In case of transport damage inform vendor immedi-
ately.
– Check the contents of the pack before unpacking.
For scope of delivery see illustration 1.
Contents
Environmental protection
Danger or hazard levels
Overview
Symbols on the machine
Proper use
Safety instructions
Safety Devices
Start up
Operation
Storage
Transport
Care and maintenance
Troubleshooting
Warranty
Accessories and Spare Parts
EU Declaration of Conformity
Technical specifications
Environmental protection
The packaging material can be recycled.
Please do not throw the packaging mate-
rial into household waste; please send it
for recycling.
Old appliances contain valuable materi-
als that can be recycled; these should be
sent for recycling. Batteries, oil, and sim-
ilar substances must not enter the envi-
ronment. Please dispose of your old ap-
pliances using appropriate collection sys-
tems.
Please do not release engine oil, fuel oil, diesel and
petrol into the environment Protect the ground and dis-
pose of used oil in an environmentally-clean manner.
Notes about the ingredients (REACH)
You will find current information about the ingredients
at:
www.kaercher.com/REACH
Danger or hazard levels
DANGER
Pointer to immediate danger, which leads to severe in-
juries or death.
WARNING
Pointer to a possibly dangerous situation, which can
lead to severe injuries or death.
CAUTION
Pointer to a possibly dangerous situation, which can
lead to minor injuries.
ATTENTION
Pointer to a possibly dangerous situation, which can
lead to property damage.
Figure 1
1
2
3
4
5
6
EN 1
7
EN 1
8
EN 1
9
EN 2
10 High-pressure nozzle (stainless steel)
EN 2
11 Pouring vent for detergent
EN 2
12 Steering roller with fixed position brake
EN 2 13 Fuel sieve
14 Safety lever
EN 3
15 Power supply
EN 4
16 Trigger
EN 5
17 Tool bag (HDS C only)
EN 5
18 Safety latch of the hand spray gun
EN 6
19 Trigger gun EASY!Force
EN 6
20 Pouring vent for fuel
EN 7
21 Dosage valve for detergent
EN 7 22 Operating field
23 Storage for hand spray gun
EN 8
24 Connecting hose of the hose drum (HDS CX only)
EN 9
25 Step depression
26 Hose drum (HDS CX only)
27 Hand crank for hose drum (HDS CX only)
28 Handle
29 Nameplate
30 Cover lock
31 Storage compartment for accessories
32 Burner
33 Recess for spray pipe
34 Cover
35 System care Advance RM 110/RM 111
36 Pressure/quantity regulation of the pump unit
37 Oil tank
38 Oil drain screw
39 Backflow valve of the detergent infeed
40 Detergent suction hose with filter
41 Fuel filter
42 Fastening clamp
43 Hose (soft damping system) of the water shortage
44 Water shortage safeguard
45 Sieve in the water shortage safeguard
46 Fine filter (water)
47 Float tank
Figure 2
A
0/OFF =
1
2
3
4
– 1
EN
Overview
Device elements
Support for spray lance
Manometer
Recess for detergent suction hose
Recessed grip (both sides)
Connection for water supply with filter
Water connection adapter
High-pressure connection EASY!Lock
High pressure hose EASY!Lock
Spray lance EASY!Lock
safeguard
Operating field
Power switch
Off
Operating mode: Cold water operation
Operating mode: Hot water operation (e = Eco
mode, hot water max. 60°C)
Indicator lamp rotation direction
(3-phase appliances only)
"Ready for use" indicator lamp
17