Configuration Menu; Service Menu - Atlas Copco CD65 Bedienungsanleitung

CD65 – CD80 – CD100 – CD140 – CD170 – CD230 – CD280 – CD390 – CD520

Configuration menu

Function
To reprogram a number of parameters.
Procedure
1. Starting from the Main screen:
– press the key "Menu" (F1)
~
– press the key until the option "Modify params" is followed by
a horizontal arrow
– press the tabulator key to activate the menu
~
2. Use the key to scroll until the option "Configuration" is followed
by a horizontal arrow.
3. Press the tabulator key: The first option shown is "Time". If
another option is desired, scroll through the display (using
keys) and select it using the tabulator key.
4. In case of option "Time", the second line on the screen indicates
the actual setting, e.g. 14:30.
5. If it is desired to modify the time, press the key "Mod". If not,
press the key "Menu" to return to the submenu.
6. After pressing the key "Mod", the first field will blink. Modify the
| ~
hours using the or keys. Then press the tabulator key to go
to the next field (i.e. 30). The setting of this field can now be
| ~
modified with the or
7. The bottom line of the display will show two options:
– "Prog" to program the new setting
– "Canc" to cancel the new setting
8. Proceed in a similar way for the other parameters to be modified.
10
keys.

Service menu

Function
– To reset the service plans which are carried out.
– To check for both the next service plans to be carried out and to
find which service plans were carried out previously.
Service plans
– See Maintenance activities
related to these plans.
When the service plan interval is reached, a message will appear on
the screen.
Example
Programmed service plan intervals ex-factory
| ~
or
Service plans
Service plan A
Service plan B
Service plan C
Resulting service actions to be carried out
Service actions according to
Service plan A, B and C
...
Procedure
1. Starting from the Main screen:
– press the key "Menu" (F1)
– press the
horizontal arrow
– press the tabulator key to activate the menu
2. A screen similar to the one below appears:
Service Timer
Running Hours
hrs
Menu
F1
The screen shows that the total compressor running time is
3971 hrs.
to find which service actions are
Intervals
Every 4.000 running hours
Every 8.000 running hours or yearly
Every 40.0000 running hours
At
40.000 running hours
....
~
key until the option "Service" is followed by a
3971
F2 F3
Service menu
}
~
2904 0177 04