To Modify A Command - Atlas Copco CD65 Bedienungsanleitung

CD65 – CD80 – CD100 – CD140 – CD170 – CD230 – CD280 – CD390 – CD520
To activate/deactivate the timer
1. Starting from the Main screen:
– press the key "Menu" (F1)
~
– press the key until the option "Modify params" is followed by
a horizontal arrow
– press the tabulator key to activate the menu
~
2. Use the key to scroll until the option "Clock function" is followed
by a horizontal arrow. Press the tabulator key, following screen
appears:
Clock Function
Not activated
Menu Mod
F1 F2
3. Press the key "Mod", "Not activated" starts blinking.
~
4. Press the key, "Not activated" changes into "Activated".
5. Press the key "Prog".
Important:
1. It is necessary to program the start/stop commands in successive
order timewise, e.g.:
– 07.30 start
– 17.00 stop
– etc.
2. Make sure that the clock function is activated (indicated as
"Activated"). If not, the programmed start/stop commands will not
be executed.
8
}
Del
F3

To modify a command

Suppose the command to stop the dryer on Saturday 18:00 is to be
modified: stopping at 17 o'clock instead of 18 o'clock:
1. Starting from the Main screen:
– press the key "Menu" (F1)
~
– press the key until the option "Modify params" is followed by
a horizontal arrow
– press the tabulator key to activate the menu
~
2. Use the key to scroll until the option "Clock function" is followed
by a horizontal arrow. Press the tabulator key, following screen
appears:
Clock Function
Not activated
Menu Mod
F1 F2
3. Press the tabulator key, following screen appears:
Monday
Tuesday
Wednesday
Menu Mod
F1 F2
4. Scroll through the display until "Saturday" is followed by a
horizontal arrow. Press the tabulator key. If necessary, scroll
through the dryer start/stop commands until the command to be
modified is followed by the horizontal arrow on the screen. Press
the key "Mod", the first two digits of the command start blinking.
Modify as required using the scroll keys, i.e. in the example
above change "18" into "17" using the
5. If necessary, press the tabulator key to go to the next field to be
modified, the minutes indication and the start/stop indication.
6. Press the key "Prog" to program the new command or the key
"Canc" to quit without reprogramming.
}
Del
F3
}
~
Del
F3
|
key.
2904 0177 04