Accessories List; Accessories Installation - Hydro-Pro INVERBOOST+ Tech Benutzer- Und Wartungshandbuch

4. Accessories

4.1 Accessories list

Anti-vibration base, 4 pcs
10M Signal wire, 1 pc

4.2 Accessories Installation

Draining jet, 2 pcs
Water drainage pipes, 2 pcs
16
Waterproof box, 1 pc
Anti-vibration bases
1. Take out 4 Anti-vibration bases
2. Put them one by one on the bottom of
machine like the picture.
Draining jet
1. Install the draining jet under the
bottom panel
2. Connect with a water pipe to drain out
the water.
Note: Lift the heat pump to install the
jet. Never overturn the heat pump, it
could damage the compressor.