Inhaltsverzeichnis
Werbung
S Acknowledge the selection with ok.
The following display is indicated:
If no button is pressed, the standard
display is restored after 10 seconds.
Use the menu button to switch to the
next adjustment (brightness).
Operating tips
S The fully automatic Nofrost system
ensures that the freezer compart
ment remains free of ice.
Defrosting is no longer required.
S The sides of the housing are sometimes
heated slightly. This prevents conden
sation in the area of the door seal.
S If the air humidity is high, condensation
may form in the refrigerator compart
ment, especially on the glass shelves.
If this is the case, wrap or pack the
food prior to storage and select a lower
temperature in the refrigerator compart
ment.
S If you cannot open the freezer
compartment door immediately after
closing it, wait 2 3 minutes until the
partial vacuum has equalised.
Fridge section
Adjusting the temperature
You can adjust the required temperature
in the range of +2 °C to +10 °C (factory
setting +4 °C) for the fridge section.
To change the required temperature:
S Touch the fridge section button.
S Use the < or > buttons to adjust the
temperature to the required value.
S Acknowledge with ok.
You also have the option of allocating the
function of a
- freezer section
or
- chiller section
to the freezer section. To do this, use the
switch function.
Super
If fast cooling" is selected, the refrigerator
compartment cools down as cold as
possible for approx. 6 hours (+2 °C). Then
the temperature set before super mode
is automatically restored. Switch on super
mode, e.g.:
- before inserting fresh food,
- to cool drinks quickly.
To switch on super mode:
S Touch the super/fridge section button.
Super mode is on when the message and
the new required temperature are on the
standard display.
Note
Also follow the storage recommendations
which you are given via the appliance
control.
en
(-4 °C to -7 °C)
(0 °C to +3 °C)
37
Werbung
Inhaltsverzeichnis
