Switching The Appliance On; Operating Tips; Setting The Temperature - Siemens KS V-Serie Gebrauchsanleitung

en
Controls
Fig. "
1
On/Off button
Serves to switch the appliance on
and off.
2
"super" button
Is used to switch on the super
cooling (see chapter entitled
"Super cooling").
3
Temperature selection button
Press this button to set the
temperature.
4
Temperature display
The numbers correspond
to the set refrigerator
compartment temperatures in °C.
5
Alarm button
Used to switch off the warning
signal, see chapter "Alarm
function".
Switching
the appliance on
Fig. "
Switch on the appliance with the On/Off
button 1.
The temperature display 4 indicates
the selected temperature.
The appliance starts to cool, the light is
switched on when the door is open.
When the appliance has been switched
on, it may take several hours until the set
temperature has been reached. Do not
put any food in the appliance
beforehand.
22

Operating tips

While the refrigeration unit is running,
■
water droplets or a thin layer of ice
may form at the rear panel of
the refrigerator. This is nothing
unusual. It is not necessary to scrape
off the frost or wipe off the water
droplets. The rear panel defrosts
automatically. The condensation
collects in the condensation channel
and is carried to the refrigeration unit
where it evaporates.
If the air humidity is high,
■
condensation may form
in the refrigerator compartment,
especially on the glass shelves. If this
is the case, pack or wrap the food
and select a lower temperature
in the refrigerator compartment.
Setting
the temperature
Refrigerator compartment
Fig. "
Keep pressing temperature setting
button 3 until the required refrigerator
compartment temperature is set.
The value last selected is saved.
The set temperature is indicated
on temperature display 4.
We recommend a factory setting
of +4 °C in the refrigerator compartment.
Perishable food should not be stored
above +4 °C.