Removing The Impeller - Heidolph Hei-TORQUE Core Bedienungsanleitung

Operation

Removing the impeller

Caution:
Possible risk of injury!
If you do not hold the impeller tightly when opening the chuck, the
impeller could fall out, cause damage in the local vicinity and result in
injuries.
Hold the impeller tightly when opening the chuck.
✓ The device is switched off.
➜ Tightly hold the clamped impeller and
the chuck with one hand.
➜ Turn the clamping ring by
approximately 180° in an anticlockwise
direction.
✓ The chuck is now open.
➜ Remove your impeller.
Clamping ring
Chuck
Impeller
21