Operation; Setting The Speed - Heidolph Hei-TORQUE Core Bedienungsanleitung

Operation

Setting the speed


The overhead stirrer rotates in a clockwise direction. The speed can be set to between
20 rpm and 2,000 rpm (also see chapter "Attachments, Technical data".)
Set the speed depending on the impeller (see chapter "Technical data",
section "Recommended speeds").
✓ The device is switched on.
➜ Turn the control knob in a clockwise
direction.
✓ The speed increases.
➜ Turn the control knob in an
anticlockwise direction.
✓ The speed decreases.
✓ The set speed is shown on the display
next to "Speed set:".
You can adjust the speed upwards or downwards at any time during ongoing operation
using the control knob.
Operation
Increase speed
Speed set: 3 7 5
375
13
Reduce speed
Set speed
0
00:00:00