Cleaning And Maintenance; Cleaning; Cleaning The Chuck; Maintenance - Heidolph Hei-TORQUE Core Bedienungsanleitung

Cleaning and Maintenance

Cleaning


The chuck and surfaces of the device can be cleaned using a damp cloth and, if required,
a mild soap solution.
Warning!
Risk of electric shock!
Liquids penetrating into the device could cause the device to become live
if it is still connected to the electricity supply.
Before cleaning the device:
▪ Switch off the device.
▪ Disconnect the power cord plug.
Caution:
Damage to the device
Liquids penetrating into the device could damage the electronics.
Only wipe the surfaces with a damp cloth and not a wet cloth.
Caution:
Damage to surfaces
The surfaces could be damaged by improper cleaning.
Do not use the following under any circumstances:
▪ Chlorine bleach or cleaning agents containing chlorine
▪ Substances containing solvents (e.g. acetone)
▪ Ammonia
▪ Abrasive cleaning agents such as cleaning wool, scouring agents or
cleaning agents with metallic particles

Cleaning the chuck

Warning:
Risk of injury!
It is possible that a heavily soiled chuck will no longer close properly.
The impeller may become loose during rotation and cause serious
injuries.
Periodically check the cleanliness of the chuck after prolonged operation
when the device has been switched off. Clean the chuck if it is heavily
soiled.
The chuck can be dismantled for easier cleaning (see chapter "Assembly, chuck").

Maintenance


The device is maintenance-free. Any repairs that may be required must be performed by
a specialist authorized by Heidolph Instruments.
In this case, please contact Heidolph Instruments directly or your authorized Heidolph
Instruments dealer.
Cleaning and Maintenance
22