Start-Up
Connecting/disconnecting the power
supply cable
Connecting the power supply cable
The device is supplied with a three-pole
power supply cable which features a
safety clip to hold the female connector in
position.
✓ The device is switched off.
➜ Connect the female connector of the
power supply cable to the device
connector.
✓ The female connector is securely
engaged when a click is heard.
➜ Insert the male connector of the
power supply cable into the mains
socket-outlet.
Disconnecting the power supply cable
➜ Disconnect the power supply cable from the mains socket-outlet.
➜ Press the safety clip to disengage and to disconnect the female connector of the
power supply cable from the device connector.
Switching the device on and off
Switching on the device
➜ Push the ON/OFF switch upwards.
✓ The device is switched on.
✓ The current software version is shown
briefly.
Switching off the device
➜ Push the ON/OFF switch downwards.
✓ The device is switched off.
Power supply
Safety
cable
clip
Device connector
ON
ON/OFF switch
12
Female
connector
OFF