Set-Up; Operation And Controls - Heidolph MR Hei-Mix S Betriebsanleitung

Set-up

Please locate the item on a sturdy horizontal surface. For reasons of safety, keep the area around the
stirrer module clear of other items
Connect the MR Hei-Mix S with your outlet
Do the following checks before connecting:
- power switch (1) OFF
("0").
- speed control (2) in extreme left position (CCW)
Connect item's power cord with your mains.
Note: the appliance features protective insulation, no protective ground required.
Stirring action
Place your container with the magnetic stir bar and fluid on the active surface of your magnetic stirrer.
Magnetic stir bars are available from Heidolph Instruments as an optional accessory.
Prior to turning the power switch (1) ON, rotate speed control (2) to its extreme left position (CCW).
When turning the power switch ON, stirrer is going to start running at the speed so selected.
Set required speed with the rotary speed control (2), go by the front panel scale marks.
SET-UP
1

OPERATION AND CONTROLS

1
11
2
2
E