Starting The Dishwasher And The Selection Of The Wash Program; Turning On The Dishwasher; Changing Program - ECG EDF 6023 WA++ Bedienungsanleitung

STARTING THE DISHWASHER AND THE SELECTION OF THE WASH PROGRAM

Turning on the dishwasher

When you turn the program selector,
the Start/Pause indicator button
turns on.
After the program starts, the
indicator Start/Pause turns off and
the Washing indicator lights up.
Following the program
You can follow the running of the program using the indicators on the control panel.
During washing and drying
the indicator Washing/
Polishing/ Drying is lit. The
dishwasher remains at rest for
40–50 minutes during drying.

Changing program

If you want to change the program while the washing cycle is running, proceed as follows:
Press Start/Pause
14
When the program ends, the
indicator End lights up.
When the currently running program
stops, the indicator Start/Pause starts
flashing. Using the program selector
choose a new program.
1. Using the selector, choose
a program suitable for your dishes.
2. Press Start/Pause to start the
program.
Do not open the door of the
dishwasher until the indicator End
lights up.
Start the new program by pressing
the Start/Pause button.
Selecting a new program ends
the running of the original
program.