Husqvarna S 138i Bedienungsanweisung Seite 18

3. Open the battery lid and turn the safety key to 0.
4. To remove the battery, press the 2 release buttons
at the same time and pull out the battery.
5. Charge the battery if it is weak. For more
To charge the battery on page 16 .
information, see
To operate S 138C
To start the product
1. Connect a power cord to the socket below the
handle.
18
2. Put the power cord in the power cord holder. Refer
To use the power cord holder (model S 138C) on
to
page 10 .
3. Stay behind the product.
4. Loosen the start inhibitor.
5. Push the motor brake handle in the direction of the
handlebar.
937 - 006 -