Herunterladen Diese Seite drucken

Work Safety - Husqvarna S 138i Bedienungsanweisung

Vorschau ausblenden Andere Handbücher für S 138i:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 107
• Look out for obstacles, such
as roots, stones, twigs, pits
and ditches. Long grass can
hide obstacles.
• To operate the product on
slopes can be dangerous. Do
not use the product on ground
that slopes more than 15°.
• Operate the product across
the face of slopes. Do not
move up and down.
• Be careful when you go near
hidden corners and objects
that prevent a clear view.

Work safety

WARNING: Read the
warning instructions that
follow before you use the
product.
• Use this product to remove
thatch and moss from grass
lawns only. It is not permitted
to use it for other tasks.
• Use personal protective
equipment. Refer to
protective equipment on page
9 .
• Do not operate the product in
rain or wet conditions. The risk
of electrical shock increases if
water enters the product.
• Do not operate the product
unless the dethatcher
equipment and all covers are
8
• Make sure that the dethatcher
• If the dethatcher equipment
• Never attach the motor brake
Personal
• Put the product on a stable,
attached correctly. An
incorrectly attached dethatcher
equipment can come loose
and cause personal injury.
equipment does not hit objects
such as stones and roots. This
can do damage to the
dethatcher equipment and
bend the motor shaft. A bent
axle causes heavy vibration
and a very high risk that the
dethatcher equipment
becomes loose.
hits an object or if vibrations
occur, stop the product
immediately. Stop the motor,
turn the safety key to 0 and
remove the battery (model S
138i) or disconnect the power
cord (model S 138C). Examine
the product for damages.
Repair damages or let an
authorised service agent do
the repair.
handle permanently to the
handle when the motor is
started.
flat surface and start it. Make
sure that the dethatcher
equipment does not hit the
ground or other objects.
937 - 006 -

Quicklinks ausblenden:

Werbung

loading

Diese Anleitung auch für:

S 138c