Cosmo CLASSIC Installations-, Bedienungs- Und Gebrauchsanweisung Seite 22

ANTIFREEZE FUNCTION
The display shows a snowdrop symbol and ambient temperature is regulated to
an antifreeze threshold of 7°C.
FORCED FUNCTION
The display shows "2H" and activates continuous heating at full power for the next
two hours.
CLOCK PROGRAMMING FUNCTION
Whilst in the CLOCK function press until the hours start to flash. Use the
button to select hours, minutes and day to set.
Use the or buttons to modify. After 5 seconds of inactivity the new time is
memorised and the program goes back to the CLOCK function.
PROGRAM SET-UP FUNCTION
While in the CLOCK function, press and simultaneously until the time starts
to flash. Use the button to select the day of the week to program:
Use to set a time range of an hour at TH temperature then go on to the next or
use to set a time range at a TL temperature and go on to the next one.
9