The electronic controller is designed for drying water-washed clothing and
heating the room. Any other use is prohibited.
Always make sure that the master switch is off before proceeding with
installation or maintenance.
Do not use the towel rail prior to its proper and complete installation by a
qualified electrician and hot-water heating technician.
Do not switch on the controller until the wiring has been checked and all cables
are connected in accordance with manufacturer instructions. Check the
controller for any damage and the O-ring for proper installation.
Do not turn off the controller by disconnecting the supply cable.
Do not use the controller if the electric circuit is not connected to a circuit
breaker.
The nominal voltage of the controller must match the nominal voltage of the
supply network (230 V AC ±10%).
The socket outlet (only appliances with a male plug) and power supply must be
compatible with the required performance.
The socket must be compatible with the controller plug (applies to appliances
with a plug only).
Check to ensure that the power supply system is connected to a socket circuit
breaker.
Class I appliances (a yellow-green conductor or earthing pin) may only be
connected to sockets or terminals with earthed contacts in accordance with
applicable standards.
Prevent any contact of the appliance with chemicals or alcohol, including the
radiator liquid.
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been give supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
Prevent unattended children form tampering with the appliance.
WARNINGS
2