Cosmo CLASSIC Installations-, Bedienungs- Und Gebrauchsanweisung Seite 21

Unlimited time regulation at 7°C
ANTIFREEZE
Forced Function (Boost), continuous heating at full power for the next two hours
2H
LCD lock function
F On Open Window Detection function
F On: function enabled.
F --
F -- : function disabled
Temperature settings are at two different levels, high and low. High temperature is used by the Chrono and Comfort modes.
Low temperature is used by the Chrono and Night modes. The high temperature can be modified only in the Comfort mode
and the low one only in the Night mode using the + and - buttons. During the setting modification, the high temperature could
be decreased until the current low temperature value (the one shown in the Night mode) and vice versa the low temperature
could be increased up to the current high temperature value (the one shown in the Comfort mode).
IMPORTANT: Changes in ambient temperature are normal with electronic thermostats when there are variations in the
power required or when conditions outside the room change. The setting is appropriate only for radiators installed in standard
environments. It is normal for the regulator setting to be different to achieve the same temperature in two separate places
(effect of the surrounding environment).
CLOCK FUNCTION
The display shows a clock
time range flashing. Ambient temperature is regulated according to the daily program.
To change the temperature settings TH and TL, press the functions button
COMFORT FUNCTION
The display shows a sun symbol
temperature setting, press the
according to the TH setting.
NIGHT FUNCTION
The display shows a moon symbol
temperature setting, press the
according to the TL setting.
, current time and day and the daily program with the
and TH temperature.
or buttons. Ambient temperature is regulated
and TL temperature. To change the
or buttons. Ambient temperature is regulated
8
.
To change the