Lionelo Lennart Benutzerhandbuch Seite 16

To loosen the harness, press the belt adjustment button
EN
(4) located in the front of the child restraint, just under the
covering. Hold the button with one hand, and pulls shoulder
belts (2,12) with the other. Pull them to have a desired
distance (first photo).
To tighten the harness and adjust it to the child, pull gently
the adjustment belt (5) until you have a desired length.
The harness must be tight but must not cause discomfort
(second photo).
Make sure the lower belt presses and secures the child's
pelvis properly.
How to adjust headrest and shoulder belt height
The headrest (1) must be
adapted to child's height.
P u l l t h e r e d h a n d l e o n
the headrest upwards and
then adjust the height. The
shoulder belt height (2,12) will
change too.
Note! Check if the headrest
has been set properly – try to
pull it up and down.