Gemü 1152 Montageanleitung Seite 2

Mounting instructions - GEMÜ 1152
Stroke limiter / Function principle 2
2
1
Figure 1
1. Take off cap 1 from actuator.
2. Move the actuator to the open position.
3. Unscrew indicator spindle 2 from
actuator.
Please observe the technical data in the product data sheets!
GEMÜ Gebr. Müller Apparatebau GmbH & Co. KG · Fritz-Müller-Str. 6-8 · D-74653 Ingelfi ngen-Criesbach
Telephone +49(0)7940/123-0 · Telefax +49(0)7940/123-224 · info@gemue.de ·www.gemu-group.com
5
4
3
Figure 2
1. Screw in stroke limiter 3 in actuator
top and adjust the desired stroke
(1 turn 1 mm stroke).
2. Press cap 4 flush on the actuator.
3. Press in indicator spindle 5 until it is flush
(actuator closed).
VALVES, MEASUREMENT
AND CONTROL SYSTEMS