ifm VSE151 Gerätehandbuch Seite 22

Attribut Name
6 Interface control
7 Interface Type
8 Interface State
9 Admin State
10 Interface Label
11 Interface Capability
22
Zugriff Datentyp
Get, Set Structure of
WORD
Get USINT
Get USINT
Get USINT
Get SHORT
STRING
Get Structure of
DWORD
Structure of
USINT
ARRAY of
Structure of
UINT
USINT
Wert / Beschreibung
Interface Control Bits
Bit 0 - Auto negotiation
(0 = active; 1 = inactive)
Bit 1 - Half/Full Duplex
(0 = half duplex; 1 = full duplex)
Bit 2���15 - reserved
Data rate
(10 = 10Mbps; 100 = 100Mps)
Type of interface:
0 = Unknown interface type
1 = The interface is internal to the
device
2 = Twisted pair
3 = Optical fiber
4��255 = Reserved
Current operational state of the
interface:
0 = Unknown interface state
1 = The interface is enabled and is
ready to send and receive data
2 = The interface is disabled
3 = The interface is testing
4���255 = Reserved
Settings of the interface state:
0 = Reserved
1 = Enable the interface
2 = Disable the interface
3���255 = Reserved
Interface name
Interface capabilities, other than
speed/duplex
Speed/Duplex Array Count
Speed/Duplex Array
Interface Speed
Interface Duplex Mode