IFM Electronic AC2616 Montageanleitung Seite 13

Operation AC2616
Check the safe functioning of the unit. Display by LEDs:
• LEDs yellow (analog 1 / 2) on:
LEDs yellow (analog 1 / 2) flashing: analogue signal outside the
LEDs yellow (analog 1 / 2) out:
• LED green (A/D power) on:
• LED green (AS-i) on:
• LED red (FAULT) on:
LED red (FAULT) flashing:
* The LED state reflects the status of the voltage from which the sen-
sor is supplied, i.e. it depends on the selected link position.
**Periphery fault
A periphery fault is indicated if at least one of the signals analogue
1 or analogue 2 is outside the value range or nothing is connected
to at least one analogue channel.
Operation AC2617
• LEDs yellow (analog 1 / 2) light:
LEDs yellow (analog 1 / 2) flashing: analogue signal outside the
• LED green (A/D power) on:
• LED green (AS-i) on:
• LED red (FAULT) on:
analogue signal in the measuring
range
measuring range
no sensor connected /
wire break
supply voltage for the A/D
converter is applied*
AS-i voltage is applied
AS-i communication error
periphery fault**
analogue signal in the measur-
ing range or no sensor connected
(it cannot be differentiated
whether the 0 V signal is applied
or whether no sensor is connected)
measuring range
supply voltage for the A/D
converter is applied*
AS-i voltage is applied
AS-i communication error
13