Introduction; Intended Use; Features; Package Contents - Parkside PABS 20-Li D5 Originalbetriebsanleitung

CORDLESS DRILL / SCREWDRIV-
ER SET PABS 20-LiD5

Introduction

Congratulations on the purchase of your new
appliance. You have chosen a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product, please
familiarise yourself with all of the operating and
safety instructions. Use the product only as de-
scribed and for the range of applications specified.
Please also pass these operating instructions on to
any future owner.

Intended use

This appliance is designed for screwing and drilling
into wood, plastic and metal. The appliance may
only be used as described and for the specified
application areas. Any other usage of or modifica-
tion to the appliance is deemed to be improper
and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage caused by incorrect use of the appliance.
This appliance is not intended for commercial use.

Features

Speed selector switch
Bit holder (magnetic)
Rotation direction switch/lock
ON/OFF switch/speed control
Belt clip
Battery charge level button
Battery display LED
Battery pack (2x)
Battery pack release button
LED work light
Chuck
Torque preselection ring
High-speed charger
Red charge control LED
Green charge control LED
Replacement lead for pencil
Cutter knife
Tape measure
Centre punch
│ GB │ MT
■ 30
Countersink
20a
Socket wrench set
75 mm bits
50 mm bits
Metal drill set
Bit holder
25 mm bits
Wood drill set
Carpenter's pencil

Package contents

1 cordless screwdriver
1 high-speed battery charger
2 battery packs
20 bits (25 mm)
10 bits (50 mm)
10 bits (75 mm)
1 cutter knife
1 carpenter's pencil incl. 2 spare leads
1 tape measure (5 m)
8 socket wrench set
1 countersink
1 centre punch
Set of 5 wood drills
Set of 14 metal drills
1 carrying case
1 set of operating instructions

Technical data

Cordless screwdriver: PABS 20-LI D5
Rated voltage
Rated idle speed
Chuck clamping range
Max. drill diameter
Battery: PAP 20 A1
Type
Rated voltage
Capacity
Cells
20 V (DC)
1st gear: n 0–400 rpm
0
2nd gear: n 0–1400 rpm
0
max. Ø 13 mm
Steel: 13 mm
Wood: 30 mm
LITHIUM ION
20 V (DC)
2 Ah
5
PABS 20-Li D5