Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Guidelines For Battery Chargers; Before Use; Charging The Battery Pack (See Fig. A); Inserting/Removing The Battery Pack - Parkside PABS 20-Li D5 Originalbetriebsanleitung

Akku-bohrschrauber-se
Vorschau ausblenden Andere Handbücher für PABS 20-Li D5:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Safety guidelines for battery
chargers
This appliance may be used by
children aged 8 years and above
and by persons with limited physi-
cal, sensory or mental capabilities
or lack of experience and knowl-
edge, provided that they are under
supervision or have been told how
to use the appliance safely and are
aware of the potential risks. Do not
allow children to use the appliance
as a plaything. Cleaning and user
maintenance tasks may not be car-
ried out by children unless they are
supervised.
To avoid potential risks, if the mains
cable of this appliance is damaged,
it must be replaced by the manufac-
turer, or its customer service depart-
ment or a similarly qualified person.
The charger is suitable for
indoor use only.
ATTENTION!
This charger can only charge the following
batteries: PAP 20 A1/PAP 20 A2/PAP 20 A3.
An up-to-date battery compatibility list can be
found at www.Lidl.de/Akku.
PABS 20-Li D5

Before use

Charging the battery pack (see fig. A)
CAUTION!
Always disconnect the mains plug before re-
moving the battery pack
it into the charger.
NOTE
Never charge the battery pack at an ambient
temperature of below 10°C or above 40°C.
If a lithium-ion battery is to be stored for an
extended period, the charge level must be
checked regularly. The optimum charge level
is between 50% and 80%. The storage climate
should be cool and dry and the ambient tem-
perature should be between 0°C and 50°C.
Insert the battery pack
charger
(see fig. A).
Insert the power plug into the socket.
The control LED
that charging is in progress.
The green control LED
is complete and the battery pack
use.
Insert the battery pack
(see fig. B).

Inserting/removing the battery pack

Inserting the battery pack:
Set the rotation direction switch
position (lock, see fig. C). Slide the battery pack
into the handle until it engages (see fig. B).
Removing the battery pack:
Press the release button
battery pack
(see fig. D).
from or inserting
into the high-speed
lights up in red to indicate
indicates that charging
is ready for
into the appliance
to the middle
and remove the
GB │ MT 
│ 
35

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis