Cleaning - Silvercrest SHTB 3 B1 Bedienungsanleitung

5) Fix the other strand of hair under the second gripper
6) Tighten the hair strands by holding the appliance at a distance away from
your head. The grippers must be pointing towards your head.
7) Press gripper button I
around each other and twist the hair strands individually as they do so.
8) Once your strands have been twisted over their entire length, release gripper
button I
9) Press rotator button II
and the two hair strands and the decorative ribbon are twisted around each
other.
10) Once the two hair strands have been twisted completely around each other,
release rotator button II
11) Remove the hair strands from the grippers
the sliders
12) Tie off the braid with a hair tie or similar.
NOTE
► You can also insert feathers into the completed braid or attach other hair
decorations.

Cleaning

RISK OF ELECTRIC SHOCK
► Never immerse the appliance in water or other liquids during cleaning!
CAUTION – PROPERTY DAMAGE!
► Do not use any aggressive cleaning liquids or solvents. They could damage
the surface.
1) Wipe the housing with a damp cloth.
2) For stubborn soiling, add a mild detergent to the cloth. Wipe off any detergent
residue using a cloth moistened with clean water only.
3) Allow the appliance to dry fully before using it again.
SHTB 3 B1
and keep it pressed down. The grippers rotate
.
and keep it pressed down. The rotator
.
. Hold one end of the braid firmly while doing so.
.
, by raising the gripper
GB │ MT
rotates
with
│ 33 ■