Cleaning; Storage; Disposal; Packaging - Silvercrest SWBP 1000 A2 Bedienungsanleitung

6. Cleaning

DANGER!
Pull out the mains plug 1 from the wall
socket before cleaning the Hot Air
Brush.
Allow all accessories to cool down be-
fore removing them from the device.
WARNING! Risk of material damage!
Do not clean using sharp objects or
abrasive cleaning agents.
Clean the device regularly. Particularly en-
sure that the air inlet 4 and the air outlet 10
are free of dust, hair and fluff.
• Wipe down the casing, the protective
grid over the air inlet 4, and the styling
brushes using a lightly moistened cloth.
• Remove the styling brushes from the Hot
Air Brush. Hold the Hot Air Brush with
the air outlet 10 pointing downwards.
Clean the air outlet grille with a brush.

7. Storage

WARNING! Risk of material damage!
Do not wrap the cable around the de-
vice (risk of cable damage!).
• You can use the hanging loop 2 to safe-
ly and practically hang up the device
for storage purposes.
18 GB

8. Disposal

This product is subject to the
provisions of European Direc-
tive 2012/19/EC. The sym-
bol showing a wheelie bin
crossed through indicates
that the product requires sep-
arate refuse collection in the European Un-
ion. This applies to the product and all
accessories marked with this symbol. Prod-
ucts identified with this symbol may not be
discarded with normal household waste, but
must be taken to a collection point for recy-
cling electric and electronic appliances.
This recycling symbol marks
e.g. an object or parts of the
material as valuable for recy-
cling. Recycling helps to re-
duce the consumption of raw
materials and protect the environment.

Packaging

When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.