Sony BKM-38H Handbuch Seite 14

4
Turn the monitor upright and place the monitor on the
control unit with the stands attached.
Fit the rear of the monitor into the joints to join them
together.
Note
Protect the monitor from scratches as you manipulate
it around the joints.
5
Secure the monitor to the stand, using two screws B (4
× 8).
Note
When you fasten screws B to secure the monitor to the
stand, hold the monitor securely against the mounting
surface.
14
Assembly
Joint
Screw B
6
Plug the connecting cable into the DC 12V OUT and
LAN (10/100) connectors at the side of the monitor.
Note
When connecting the cable into the DC 12V OUT
connector, be sure to plug the connector of the cable
into the DC 12V OUT connector on the monitor in the
right direction.
Plug the
connector in the
right direction.
LAN (10/100)
connector
DC 12V OUT
connector