3
Attach the left and right covers to the stands, using four
screws A (3 × 8) each.
4
Place the joints on the left and right stands and fix them
securely using two screws B (4 × 8) each.
Joint
Rear of the
control unit
Joining the Stand and the Monitor
1
2
Screw A
Screw B
Joint
3
Turn the monitor upside down.
Remove the four legs from the bottom of the monitor,
and remove both left and right screws from the rear of
the monitor.
Note
Place the monitor flat on a soft cloth.
Attach the supplied two legs to the bottom of the
monitor, using screws D (4 × 16).
Screw D
13
Assembly